Viewing all customer Discussions for:

38-036 Rear Mount Casement Lock, 2-1/2"

Patent # 4.674.777 I see a similar part but not exact

I would like to know if you have these parts.

Hello folks at Swisco. I am looking for some replacement latches to fit these Acorn brand windows. That company has been out of buisness for a while. The windows are aluminum frame. The distance from the center of the "axle" of the handle to the locking surface of the handle is 15/16 inch. The cente ... (cont.)

I have several broken .. I need a few replacements.

The 4 latches shown work, but need to hold them open in order to close or open window. Is there a part missing that holds them in the open position? Or do I need to replace the latches... If so, would you please provide the part number I need to order Thanks, Garey

The only identifying number on it is the US Patent # 4.674.777 There are two latches on each window, so will need 4 latches.

Need to replace this for vertical window at condo.

I need the part that the locking arm rests in.

I am looking for a window lock part replacement as shown in the following photos. Thank you!

I just received the window latch, 38-036, and it fit the window perfectly, but the old fasteners from the old latch, do not fit the new part. Just wondering if you might know the screw size for the 38-036 window latch? Thanks, Joe

numbers on handle 2 30270 rear mounting holes at 2 1/2 inches apart - locking arm 13/16 inch spacing would prefer white assembly

The window opens and closes with the crank. When closing the window, the lock doesn't stay closed. It keeps popping out. The small plastic tubes on the inside of the lever lock broke and fell out.

The length on the crank part looks to be about 13 inches from inside the crank the crank itself is 4 inches to fit back in the window

Hi. Need about a half dozen of these if you have them. Or, perhaps, a replacement handle that will work. They don't have to be cosmetically identical.

Hello, can you help me identify the parts I need

the tiny white plastic piece has broken so latch will not stay shut. Piece that inserts into window frame is 3" long by 9/16" wide.

PGT CA700 are obsolete. Need replacement suggestions.

Looking for this window lock with handle for a casement window.

Need a replacement for the metal crank/opener and all metal bars that attach to it and the window itself (pic 2) The metal rail that holds all the pieces and screws into the bottom of the window frame is 9". Also need 2 plastic handles plus the piece that goes around them (like a picture frame, pi ... (cont.)

Window latch handle