Viewing all customer Discussions for:

38-091 Multi-Point Sash Lock LH, 24 Series

Good morning I have a casement window manufactured by Certainteed had windows installed around October of 2004 the color is tan as seen in picture the metal has a number Truth 31401A was wondering if you have replacement for this. Thank you

I need Sach Lock as shown in the picture. I think it is your "Multi-Point Sash Lock RH, 24 Series, 38-092", but would like to confirm. In terms of tie bar guide, looks like your "39-448" is a match, only a little bit thicker. The thickness of "39-448" is 1/2", but only 11/32" for my existing one. W ... (cont.)

The closing mechanism doesn't fully lower bar to close window. Need replacement

Need lock and handle mechanicals Handle 30905 true hardware Lock latch 31402 true hardware White handle

Looking for viking casement window hardware

No part numbers found. Please let me know if you need more information . Thank you

I believe the windows are TRUTH brand and they are casement. The pictures are of the right side of a double casement window that measures about 57.5" by 69". I need hardware for the left side. I need the window arms top and bottom and I need the locking mechanism. Can you help?

Bought through Thermal Windows and Siding in Indianapolis in 2009. Company no longer in business. Looking for replacement lever lock.Triple glazed, Krypton enhanced low-e. Casement TRI-K-52-00039

Hello. The part is the locking mechanism from truth. Numbers on the unit are 21132 next to the screws holding it to the sash and 31402 A on the arm coming out of the lock. The arm coming out of the lock is approx 3" and the interior part is 4 inches tall. I would like to change the color. ... (cont.)

Hello, I need a window cranker like in photo. I need like 5 of them Measured 4"/around 1" Let me know if the half inch would work. Also one photo has like a window closer. Please guide me to the right one.

I've got more photos of rest of parts, if needed. I want to replace ALL hardware on 14 windows (7LH & 7RH). These windows were installed circa 1995.

The distance between the 2 screws is 3 7/16 inches.

Hello, I need help to find out what is the type of window handle we have here. Could you help me identify it please? It doesn't hold anymore in the hole, once I opened the window, it stay in my hand, and it doesn't seem to work anymore. I think that handle is OK. It is more about the attaching syst ... (cont.)

I've ordered Truth hinges and Regulators. Now focusing on window-lock's. Please LMK if you have something that is same or similar for this application.

I would like to order the above right and left window locks. I thought I had ordered these before but I cannot find an order for them. All of the replacement parts for our windows so far have been Truth parts.

Casement window lower lock kit

Hello, I have attached some pictures of a current working window. I'm looking for these parts for another window in my home same design as this, one is a left side hinge swing the other is a right side hinge. Please let me know if you need any other information.

Hello please help me identifying the attached TRUTH Lock

Appears that the handle broke off of the lock mechanism. Hole centers for attchment screws are 3 1/2 inches. I have photos to send you, as I cannot identify an exact match on your website. Please advise how to pass them along. These windows were installed in approximately 2021 or so by the Kimber ... (cont.)

Hello, We are looking to replace the locking bar and all hardware to lock, open and close the window. I could use some assistance. I see Truth listed on some parts. Thank You!