Viewing all customer Discussions for:

39-001 Window Crank Operator, 9"

Need this part to open and close window

The teeth on the arm have worn away. Looking to find replacement Thank you in advance for your help identifying it

Renovating metal casement windows in a house built in the late 1930's. Need window crank opening and closing mechanisms.

Looking for replacement parts. Appears to have "Betty" stamped on unit.

The windows have been painted shut for years. Installed in 1954 on an addition to a 1935 Tudor Cottage. I got the paint broken way and was successful with 15. Got them open and cranks worked on all. Not sure way the last one broken. Need a replacement.The window is metal with a metal frame on a wood ... (cont.)

Hi - After almost 70 years, our window cranks are no longer working right. The teeth in the mechanism are wearing out, so we can't open and close the windows. The crank will turn, but the arm will not open and close. So, we would like to order new cranks. Can you please recommend a part? Thanks! ... (cont.)

Crank handles have fell out and won't go back in. Springs that attached to storm windows are broke off

Can you help me repair broken / stripped window cranks. I need 4 replaced. Thank you

Just called. They are 8.5

Hello.. After seeing there are different dimensions / tolerances on the 'bearing' that rides in the window track, I am uncertain which replacement operators to get..

1954 bungalow West Palm Beach Florida. Original aluminum casement windows crank outward. Class is held on by window glazing

Do you have a replacement crank for this?

I need a casement window track for my steel casement windows. The operator has a nub at the end that is approximately 5/8" diameter and about 1/8" thick. The distance from the mounting screws on the window are about 12-1/2" from each other.

Repairing or replacement from 1950?s Truscon steel casement hardware... the cranks don?t connect with the teeth on the arm?

US PAT 4505601. 40223 40063 both numbers listed on inside. 40050 listed on arm, also "TRUTH" with an arrow Need 4 right crank and 4 left crank

Hi, Here are my photos of the casement assembly with working crank. I need a compatible replacement for cranks that have had their internal gears stripped.

Hi, I have a slipping window right and left that I would like to replace. Attached are some of it's dimensions. My other room looks to have a newer version that seems more robust that I would like to get. Do you have anything that would work? Thanks, Karie

Aloha, I am trying to find parts to replace these awning window cranks and arms, window frames are all aluminum. They were probably installed in 1989. What do you suggest?

Hi, These are 1960 era aluminum window cranks. Most have broken handles as well. They don't open or close the windows very well, it's like the crank engages and disengages while turning the handle.

I am looking for a crank arm assembly for a 1950s window. The window frame is 19 1/4 inches wide, the crank arm is 8 5/16 inches on its longest edge. The crank would be on the left side. I also need the locking mechanism Thank-you