Viewing all customer Discussions for:

39-001 Window Crank Operator, 9"

House built in 1954.

I need a replacement window crank. The company is Bourne, and the length of the arm is 9". Please let me know if you can find me one. Thanks, Sincerely,Rich

My house has 12 original steel windows and I'm trying to figure out the manufacturer so I can replace broken/missing crank operators. I've had no luck finding any stamps/manufacturer indicators. The windows are painted shut and I haven't opened them to see if there may be any information inside the ... (cont.)

I need to replace these cranks and latches. there is also a spring loaded holder for the screens

Is a folding or low profile handle offered for this operator? Thx. LH

I need to replace a worn out crank that appears identical to this one, but need a stud shoe and clip for my track. Do you carry such an operator? All measurements are identical, as demonstrated.

My two bathroom window cranks are broken. I've attached pictures of the casement cranks - please disregard the cranks as those are new and not original parts. Not sure how long the bar is as both windows do not open.

Subject. No brand or part number anywhere on device.

Which T handle fits this unit? Thanks

I do not see any names, numbers or markings. These crank devices are attached to steel framed windows in a house built in 1951. Hoping you can identify the devices and help me find replacements. There are 7 right-hand and 7 left-hand devices on the windows of the house. Thank you. Brad ... (cont.)

Need to replace this crank for a metal casement window. What do I need to measure to find the correct part.

Hi Swisco, I am in need of two replacement casement window openers (one right hand and one left hand) for my casement windows. Can you please help me identify what the correct replacement would be for this part. The box is 5 1/4 x 1 1/2 inches. And the arm is 9 1/4 inches long. Thank you, Charlotte ... (cont.)

Says LH at the bottom, Looks a little shorter than the 9 inch window crank on the website I found.

Looking for a non-folding crank for this 12-tooth spline. The narrow part of the spline (where there are no teeth) measures somewhere between 1/4" and 5/16" diameter, as measured with manual calipers. The wider base of the spline is about 3/8" diameter. There are 2 sets of teeth with a gap between, ... (cont.)

We have 12 casement windows that need replacement operating cranks. Only 2 of them are operational at present. I will be happy to send additional photos or measurements. We also need some replacement locks but I reached the maximum number of files and can send photos of those later. Please let m ... (cont.)

WE WILL NEED 4 LIKE THIS AND ONE OPENING THE OTHER WAY. THEN WE WILL NEED MORE FOR SEVERAL OTHER HOUSES, ALL FITTED IN THE LATE 1950'S ANDCEARLY SIXTIES, HOWEVER SOME OF THESE MAY HAVE BEEN REPLACED IN THE '80'S

Opens left. Arm seems to measure 8" from the bend to the opposite end. Screw holes seem to measure 4-3/4" for the outer holes and 4" for the inner holes. (I'm not great at measuring.) This is to replace a crank on a steel-frame "architectural" (?) window, it has multiple small panes, it's probably f ... (cont.)

Hi My name is Brian i am the director of maintenance at Legacy Treatment Services. your company has been great at having all the parts we need to keep up with our repairs and was wondering if you had something to replace this operator. If so i need a left and right please let me know. Thank you in a ... (cont.)

Hello I would like a quote for 9 cranks as shown on the description.

Dimensions in pictures. No scores or trademarks except an "L" that is inside a circle and an "L" that is not. -can see in picture.