Viewing all customer Discussions for:

39-001 Window Crank Operator, 9"

I need a neecranking mechanism for thorn...#6rs-132r

I need a replacement for this crank, I also need one that goes the other direction. It seems like a right left sort of thing.

Looking for a channel guide for my casement window. I saw your product code 39-504, but it was too short. Do you have any that are around 16" long? I have attached some pictures. thanks

Hello,I am trying to find replacement window operators for my refurbished steel windows. I have the part still attached to the window before we refurbished it and stand alone. I would prefer if you had this part in black since we painted the windows black. Please advise if you carry this part. Al ... (cont.)

I need to replace this part so that my window will crank open. Built in the 1950s as you look at the window from the interior , it is on the right side.

No identifying numbers but I need a right and a left please

Window crank for kitchen window,. Original part for house built in 1957.

We are looking for a window crank for our home. Yhe house was built in 1910, this is an original window and the crank housing has cracked as seen in attached photos. Any help would be greatly appreciated. Thank you in advance for your help. Chasidy

THORN is written on the top of the crank housing. The number 6RS-13 is sramped on the bottom of the crank housing. The arm is 8 1/2 inches long.The crank housing is 4 3/4 inches wide.There are 3 holes in the rear of the crank housing, one at each end and one 1? (measured from the center of the en ... (cont.)

I have two casement window hardware. I am missing handle on one. If I can get new handle great. If too dificult to get handle, I am glad to get two new systems. 11.5" from center of "crank box" to end of extension. I want somewhat same shape as there are custom screens made for this. Thanks!! ... (cont.)

Hello. Trying to find hardware window casement parts.

I don't see any markings on the old opener. No name or numbers

Here is a couple of pictures with tape measure showing sizes, I am looking for two left side window crank assemblies with connecting arm. They have 4 screws that screw into the bottom face of the frame on both sides of the slot where the 8" arm protrudes through the frame.

I'm looking to replace the operator hardware on about a dozen windows from this '40s era home in Phoenix. Can you advise me about replacement hardware? Also, are there retro fit screens available to install on this type of window? Thx, Tim

I think this could be replaced with your part #39-002, a right swinging operator.

This is from a window approximately 50 years old, metal frame casement. The crank mechanism isn't working.

Hello, This to me looks like a right hand 9" casement window operator. The measurement for the outside holes are 4 7/8" and the inside holes are 3 7/8". It is 3/4 thick/high top to bottom as it mounted at the bottom of the window. Thank you, James

Hi. We are a nonprofit restoring a 1947 home in Austin TX. We have several window mechanisms that don't work & some broken handles. Can you help identify replacement parts. There are no identifying markings on the top, sides or bottom. Just a "1" underneath. Thanks.

Please help us in identifying this part. Thanks

Crank has number 250-32 You have to push the window out about 8 inches for the crank to engage We have 5 windows