Viewing all customer Discussions for:

39-002 Window Crank Operator, 9"

Renovating metal casement windows in a house built in the late 1930's. Need window crank opening and closing mechanisms.

Looking for replacement parts. Appears to have "Betty" stamped on unit.

The windows have been painted shut for years. Installed in 1954 on an addition to a 1935 Tudor Cottage. I got the paint broken way and was successful with 15. Got them open and cranks worked on all. Not sure way the last one broken. Need a replacement.The window is metal with a metal frame on a wood ... (cont.)

Ulaco 710-01-r

Hi, I am looking for replacement for this casement operator, from aluminum window c. 1960. Stamping on inside of casting reads "LH 4708-3". It looks to be 8" from shaft to pin centerlines. The housing can be any shape - it doesn't need top match anything. Thanks, Chris

1954 original on crank out verticle casement type window. Crank handle does not engage internal gearing. Have not yet been able to disassemble from window frame but aim to extract assembly and replace.

Hi - After almost 70 years, our window cranks are no longer working right. The teeth in the mechanism are wearing out, so we can't open and close the windows. The crank will turn, but the arm will not open and close. So, we would like to order new cranks. Can you please recommend a part? Thanks! ... (cont.)

Crank handles have fell out and won't go back in. Springs that attached to storm windows are broke off

Can you help me repair broken / stripped window cranks. I need 4 replaced. Thank you

Hi, I'm looking for replacement casement window cranks for vintage windows on a 1950's era cabin. Would you have a product that would be compatible with the pictures shown?Thanks, - Steve

Base is 5-1/4 inches long and crank part is 2-3/4 inches long I have the white cover that fits over the mechanism.

Just called. They are 8.5

Hello.. After seeing there are different dimensions / tolerances on the 'bearing' that rides in the window track, I am uncertain which replacement operators to get..

1954 bungalow West Palm Beach Florida. Original aluminum casement windows crank outward. Class is held on by window glazing

Do you have a replacement crank for this?

I need a casement window track for my steel casement windows. The operator has a nub at the end that is approximately 5/8" diameter and about 1/8" thick. The distance from the mounting screws on the window are about 12-1/2" from each other.

Repairing or replacement from 1950?s Truscon steel casement hardware... the cranks don?t connect with the teeth on the arm?

US PAT 4505601. 40223 40063 both numbers listed on inside. 40050 listed on arm, also "TRUTH" with an arrow Need 4 right crank and 4 left crank

Hi, Here are my photos of the casement assembly with working crank. I need a compatible replacement for cranks that have had their internal gears stripped.

Hi, I have a slipping window right and left that I would like to replace. Attached are some of it's dimensions. My other room looks to have a newer version that seems more robust that I would like to get. Do you have anything that would work? Thanks, Karie