Viewing all customer Discussions for:

39-002 Window Crank Operator, 9"

US PAT 4505601. 40223 40063 both numbers listed on inside. 40050 listed on arm, also "TRUTH" with an arrow Need 4 right crank and 4 left crank

Hi, Here are my photos of the casement assembly with working crank. I need a compatible replacement for cranks that have had their internal gears stripped.

Hi, I have a slipping window right and left that I would like to replace. Attached are some of it's dimensions. My other room looks to have a newer version that seems more robust that I would like to get. Do you have anything that would work? Thanks, Karie

Aloha, I am trying to find parts to replace these awning window cranks and arms, window frames are all aluminum. They were probably installed in 1989. What do you suggest?

I am looking for a crank arm assembly for a 1950s window. The window frame is 19 1/4 inches wide, the crank arm is 8 5/16 inches on its longest edge. The crank would be on the left side. I also need the locking mechanism Thank-you

I need a neecranking mechanism for thorn...#6rs-132r

I need a replacement for this crank, I also need one that goes the other direction. It seems like a right left sort of thing.

Hello,I am trying to find replacement window operators for my refurbished steel windows. I have the part still attached to the window before we refurbished it and stand alone. I would prefer if you had this part in black since we painted the windows black. Please advise if you carry this part. Al ... (cont.)

No identifying numbers but I need a right and a left please

Window crank for kitchen window,. Original part for house built in 1957.

We are looking for a window crank for our home. Yhe house was built in 1910, this is an original window and the crank housing has cracked as seen in attached photos. Any help would be greatly appreciated. Thank you in advance for your help. Chasidy

?

THORN is written on the top of the crank housing. The number 6RS-13 is sramped on the bottom of the crank housing. The arm is 8 1/2 inches long.The crank housing is 4 3/4 inches wide.There are 3 holes in the rear of the crank housing, one at each end and one 1? (measured from the center of the en ... (cont.)

I have two casement window hardware. I am missing handle on one. If I can get new handle great. If too dificult to get handle, I am glad to get two new systems. 11.5" from center of "crank box" to end of extension. I want somewhat same shape as there are custom screens made for this. Thanks!! ... (cont.)

Hello. Trying to find hardware window casement parts.

I don't see any markings on the old opener. No name or numbers

Here is a couple of pictures with tape measure showing sizes, I am looking for two left side window crank assemblies with connecting arm. They have 4 screws that screw into the bottom face of the frame on both sides of the slot where the 8" arm protrudes through the frame.

I'm looking to replace the operator hardware on about a dozen windows from this '40s era home in Phoenix. Can you advise me about replacement hardware? Also, are there retro fit screens available to install on this type of window? Thx, Tim

I think this could be replaced with your part #39-002, a right swinging operator.

This is from a window approximately 50 years old, metal frame casement. The crank mechanism isn't working.