Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

Looking to replace the dozen or so casement window operators, the color should be a light brown similar to the color of Cedar. The Arm is 13 1/2 inches long. It came from a casement window manufactured by supervision and was manufactured by Truth.

I'm looking to replace these operators. They seem to be about 12.5 inches from the rotating disk at the end until the bend in the arm. These are two separate operators. Both say Truth on them. Do you know what parts they would be?

Looking to replace the operator cover, operator handle, track, and lock to update to white and fix operator falling out of track

Extension arm - 358-2 Windows were installed in 1977

Can you please take a look at these photos and provide me the list of items I need to repair this window? Provide pricing and instructions for me to order from you. Want to replace everything that connects the window to the frame, both top and bottom. I am not sure of the brand of window... I b ... (cont.)

Could you identify this operator? The handle says "Hurd" and the arm says "Truth". I couldn't find any numbers. Thanks in advance. Debbie

Hi! I'm looking for a replacement crank operator for a casement window. Photos attached. I can find no numbers or markers of any kind on the part. On the handle is the name Burton. Burton is also stamped into the wooden window frame. The unit measures 4" across at it's widest point. The arm measures ... (cont.)

Hello, I was hoping to get some help with the window crank attached to this post. It is truth hardware and has the little roller on the end of the arm. Thanks so much for your help!Bob

Hello, I'm wondering which replacement part I would need, I tried contacting another website but they were no help. This was from an old weather shield window from around the 1980's. Thank you!

I was working with you on replacing a complete operator set for a casement window.I need all the parts, operator, arms, window brackets channels.I will send another post with a couple more photos.I believe you identified what was the most likely fit, but i lost the information.My Best,Mike ... (cont.)

I have two openers, one opens left, the other opens right. Besides that, they appear to be identical. The part number on the back is 40055 and 40056.They are 13 1/2" from the center of the point the metal arm mounts on to the center of the white roller that goes in the track on the window. I need th ... (cont.)

is Swisco item # 39-013 compatible to TH 23028? Thank you.

Hello, I have some casement windows from 1983 and am looking to replace the operator arms, crank handles, and sash lock with a compatible keeper. Part numbers are as follows: operator arm: 40056 RH with the number 3 on it crank handle: can't find number but want one that matches operator color ... (cont.)

Bought an older house. Has 3 39x22.5 top hinged casement windows. Crank say "SEMCO" side latches sat "Truth 31705" Latches and cranks are stripped\broken. We need 3 full opening assemble us and 6 side latch assemblies. Thanks

We are looking for a Truth Casement Operator for a vetter window with a 13 1/4 in arm and a 7 1/2 inch arm.

Hi, I am looking to see if 39-458 would be the best choice for this (pictured) for a single arm length at 13 inches (measured between the gear and arm to the end of the arm). I see the arm length is at 11 3/4. Does the arm length have an effect on the window? It is a roller end. I am looking to ... (cont.)

In Image 1820 - you can see the window has become displaced out of the track on the top. In image 1823- the crank arm is disconnected, this arm does not look like the arm used on the other crank out window, it must have been replaced at some point On the lower track, the window is connected but the ... (cont.)

Do I have to take the window frame apart to remove the operator? It appears the gear is striped. It won't crank in or out. I have the 13 1/2" one

Arm says 30744 but I'm having issues with the internal hardware slipping when cranking the window in or out. I want to buy the exact same assembly but I'm not sure which to buy.

Searching for a left and right crank window window operators. Part is stamped "Wright" and "7701" the arm measures 12". Thanks.