Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

truth cranks

I have a Truth window actuator. Stamp number 45251. Its white. If there is a better quality replacement I'd be very happy.

We have 2 windows that are hinged on the left in which the crank is stripped. I believe the arm is 13 inches. We're also looking for a price on weatherstripping. The picture above is a little large, but we made it work. Also, we need a new lock mechanism for the same windows. Thank you! ... (cont.)

Can you help? what do you have that will replace this old Casement window Operator that is 13 1/2" long. Thank you Jean

I am looking for a replacement casement window operator. It is written as Wright 07702-00 on the back of the part. Please see the picture. Thanks.

The other casement anderson windows in the house are from 95-98. This particular part has no numbers at all. There is a round hole at the bottom of the crank that the arm went into and the round piece of steel is now sheared off. the arm can no longer be attached to the crank.

I am searching for Wright #30774 casement operator

I need a new cranking mechanism for my Norco window. The arm length is 12 inches long. Picture included.

Good morning! Our home was built in 1989 and there are Semco casement windows throughout. We are in need of 2 replacements window crank mechanisms as well as arms--can you help us identify what we would need? Thank you! Micca

Crank portion is 4", arm is 12". No markings found

In need of a replacement assembly for my casement windows The cradco 9 1/2 looks identical except for the arm length - mine measure 13 1/2 inches Any help in locating this style with a 13 1/2 inch arm length?

this is wright window operator 131/2" the operator case works fine but as you see on picture#4 the crank shaft is broken at the bottom ,do you sell just the crank shaft or i have to replace the operator and what operator do you suggest,my case width is 4"?

The operators are about 18 years old. I don't know the manufacturer of the windows. It has stamped name of Wright. The best I can measure is 13.5 inches.

This crank is from what I think is a caradco casement. The length is 13.5 inches from end of roller to center of gear. Can you recommend a replacement. I'll need left and right.

the knob works but the crank it goes on is dull so any replacement knob i try doesn't work

I have a casement window crank that works well cranking the window out (counter-clockwise). But when I try to close the window, turning it clockwise, it just turns freely and the spindle (worm gear) just screws right out of the casing. I believe it is missing a retainer clip that should keep it tigh ... (cont.)

I need to replace a casement window operator, Truth model 45251, 13-1/2" arm. Do you ship to Canada or have an agent in Canada? And what are the costs involved?

We have 8 windows we would like to buy new hardware for. Picture: 1) Craftline window lock has the number: 40226 2) Crafeline window lock front side. 3) Sash crank hardware underside has the number: 45034 LH 4) Craftline crank handle has the number: 45012 5 Craftline crank hardware fr ... (cont.)

9&1/2 arm center to center, arm marked "wright" in script lettering. on the bottom of the opener "7702" is stamped on both sides. i would really be interested in replacement parts, especially if your parts are better quality than these. also reply as to if the opener pictured is a rh or a lh. Thank ... (cont.)

I need replacement of my Wright window regulator/controller, part#7701 (fits Norco Casement Window). The metal bar is 13.5in long.