Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

Hi there! I need to replace a casement window crank. I still need to figure out how best to remove the old one from the vinyl window, but that's a different story. Can you help me find the right replacement part? Existing operator is Truth and appears to be a single arm.

I have a number of the same size windows where the operators seem to have a lot of play in them especially when its windy and are also very loose in their open/close operation. I assume that over the 40 years they have been in that the metal gears have become worn. Based on the way you show your m ... (cont.)

I have 2 different lengths. One set of windows carries a 9 inch arm and the other set carries a 13 1/2 inch arm. I'll need some RH as well as LH Thanks.

I am just wondering you help me ID this part. The gear is worn out ad I need to get a replacement one. measurement is 3" (screw in between) and for the handle is 13.5" length it has marking TRUTH 45251 and 01972004 0327 for single folding crank assembly. Thanks

Due to an email issue I was unable to send this message through your website do am submitting here as a new discussion. Hello, I am trying to replace the operator on a casement window that has failed. Enclosed are 3 photos which I hope provide enough detail for you to identify and advise if you ... (cont.)

I am a licensed General Contractor, wrapping up a remodel on a house we bought to flip, and have it for sale now. In doing final clean yesterday, I noticed the windows had some issues. The windows are BestBilt casement windows, and while most are vertical, some are horizontal. They all appear t ... (cont.)

I am selling my home and need a replacement casement window crank arm or whole mechanism for a norco casement window in bronze color. Please let me know if you have a part that will work? Norco is owned by Jeld Win now I believe.

I need about 7 of these. Not sure how to measure them. The base of the operator (corresponding to the hole in the sill) measures a little over 4 inches. The arm of the operator measures about a foot.

Looks like 39-255. (9-1/2") arm. Arm is marked 30350. On bottom plate slide mounted to window is marked 358-1R. Do you you have replacements. I need 2 each RH.

Do you supply a replacement for the window opener shown in the attached photos

Hi there, I am looking for what you probably would call Traditional Style Crank Operator (both left and right side), with 13" arm. I was not able to identify it on your products' list. Image enclosed. Details on the operator: Made in USA US.PAT.4505601 PAT.Canada 1986 U.K.PAT.2135397 35 I w ... (cont.)

I am seeking replacement window operators, both LH and RH for Caradco windows which were installed in 1966. The arm measures 14 1/4 inches as measured from the center of the nylon roller to the center of the gear. I have found no other identifying markings or stampings. Robert

I need several replacement Truth parts in the color "Clay". Specifically: 2x 38-144 2x 38-160 1x 39-013 1x 39-014 Can you get these? Thanks!

Caradco is exactly what I need however I need it to be 11". Do you carry an 11 " Caradco window crank?

I have a window opener that says on one of the arms and there is a stamp on the bottom of the mechanism that says 7701.

Going to be restoring 3 old push-out casements and want to change out the hardware to cranks. Can you help with suggested parts based on the pics attached? I'll circle back about 4 monster push out awning windows later....

Looking for a right hand truth hardware crank 13.5" Part #40055 Bronze with a 11 3/8" track

I wish to buy replacement cranks. Crank body is cracked, thus disabling the movement of the gears. Are these available through your company. If so please notify me as to price. Thank you. DF 1100 CCMC 9164 & 11404 Brevet Can. #1, 160, 103 Brevet U.S.A. #4,400,923 A-440 A3, B3, C3 ... (cont.)

I need to replace both the right and left cranks/arms of a bay window of a house I purchased. Not sure of window brand. Arm of crank has rimco stamped on it. Please help Jason

Hello, I'm trying to identify the type of casement window operators to use to replace these. Can you assist given the attached pictures? Thanks, Peter