Viewing all customer Discussions for:

39-022 Rear Mount Casement Operator, 11"

I will like to buy this unit. I can't find this unit can you help me thank you

1. The opening (for gear bore) is about 3/8 inch. (Photos are, Imag0992 and Imag0993 2. The photos (Imag0990) showed the dimensions. 3. I cannot find the logo of Anderson on the casement window.

The picture is the left side, we need the right side crank. The window is in a closed position and won't open. Can you identify what we need, found a tag that says Traco on the lock. It's cold out and they don't want the window open, so I can't remove it yet. So, if you can't identify I'll ha ... (cont.)

Not sure where I can find these replacement cranks and sliders, I'm in Chicago I'll 60641, any help will be greatly appreciated , there is no model number on the parts except a pat. Number which is 4505601 and there is a name on the part which is (truth).

Could you help find a match for this window operator? I have attached pics.

Can you recommend a replacement part?

Can you tell me if you have a replacement for the following casement window operator? see pics. I've also included a pic with a tape measure next to it. Thanks. Chuck

3 cranks on these casement windows are broken. The Manufacturer appears to be Truth

Greetings, I recently purchased two operators (39-022) from your firm but upon receipt found they are not what I need. They are similar in all aspects to my original operators except for the mounting screws; the replacements are mounted from the outside of the frame, while my originals mount f ... (cont.)

I don't know who the manufacturer is. The hole pattern matches the 39044 configuration, but the arm is 11" long. The number "40067" is stamped on the arm. The operator has threaded holes and is mounted from the backside (window frame has through holes). The channel guide resembles 39504 and ... (cont.)