Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

I have a "crank" operating window that I cannot close after opening. I am looking for the proper fix, possible a replacement crank. Thanks Tim

Hello. My name is Gary Boerema. I'm looking for this window crank. It is for my bathroom window. I need the crank, handle and the white attachment if possible. Any help in this matter would be greatly appreciated. You can respond to email above. Thank you. Gary

I need replacement operators and hinges for two casement windows, one right and one left. Do you carry what I need? Which ones?

On the back side of the casement arm, it is stamped" 30-473 RH.the longer arm is 9.5" and the shorter connecting arm is 4.5"I need to order the complete window casement crank setup , for both the bottom and top parts. I do not need any locking hardware.I estimate this was purchased and installed a ... (cont.)

Here is some more information that I can share: the push arm, has a number of 40754 stamped on it. The link arm number appears to be 30810, but is XXX'd out, replaced with a new number of 21135. Pull arm has 31538a stamped on it. Hope this is helpful.

I have a broken casement window operator. It says Entry Guard Truth. The number on the arm is 20544. The number on the cylinder barrel is 30710. The short arm is 3 15/16" center to center of the holes. The outer mounting screw holes are 4 7/16". Looking to replace this.

Hello, I'm looking for a replacement for a broken window crank- please see attached photos. thanks!

I have a EntryGard 20755 arm operator and a Caradco hardware cover. Can you please provide the replacement part numbers. Thanks

The crank handle says us pat 4083264 Can pat 1979 And then 45012 on the right corner

I need two replacement units for Semco casement windows. the gear unit is stamped with the number 45179 and the operator arm is stamped with the designation "L 31538". Thank you. Richard

base is stamped 40254 gearbox is stamped 30471 dual arm need 2 right, 2 left with handles

Hello, I need to identify the part in the second/middle picture (Also circled in the first picture). It's the metal piece that attaches directly to the bottom of the sash. The rivoted swivel piece attached to it has a part # of 31229. It all seems to be Truth hardware. Are the right and left handed ... (cont.)

This is a dual arm window operator. The longest arm is approximately 9.5 inches long. It is likely made by Truth, though that's not certain.

There are some numbers in the part -03- I4- 07 I need a right and left one

Please help find the part number & prices for this 9" Crestline window! Thank you very much Wayne

Will parts 39-375 and 39-376 fit these Kolbe casement windows (originally installed in 2002).

Need to replace crank mechanism on my 30 yr old K and K windows. Need a right and a left sided cranks.

Long arm, 10 1/2 from middle of 40254 plate, 30472 RH on back. 4 1\2 on short 20544 with clip.

Semco on the crank handle, Truth name on the brass or bronze stamped gear mechanism. I think the the collar that holds the crank handle splits and does not retain the crank.

Hello I'm trying to find replacements for these Windsor window cranks. I believe they are older windows but am not sure. Three of the 6 have fallen apart since we moved in. The gap in the window frame that the crank sits in is 5" across. The rail on the window that the arm rides in is 11 1/2" rou ... (cont.)