Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

We have replaced all of the operators in our home using part numbers 39-032 and 39-031 but this one is a different window size and the crank is in the middle of the window. Can you help determine the arm operator needed? Thank you

Crank just turns and nothing happens? Help!

It labels as EntryGuard Truth. there is a number of 20610 on th right part.There is a number as L3084 on the arm part.

Looking to replace this mechanism. It is from a truth window I believe. I don't know when the window was installed... it is hinged on the left when you are looking out the window from the inside. Hope you can help...

Just replaced the Operator with Code 39-032. Seem to have lost the operator cover. What is the part number to replace the cover? Color brown.Thanks

Right hand window crank facing outside

Please advise if you have these exact systems for replacement. Long arm is 9 1/2 ". Crank base is 4" wide and 1.5 " deep. Need it for left opening window as well as right opening window. ( Pict.# 2916, 2917 ). Part # 20810 The 3rd window are pict. #2918, 2919, 2920. (9 1/2" long arm. Base5") ... (cont.)

I am looking for a crank operator for a Crestline casement window.

I need a right and left hand mechanism and covers Do I have the correct parts in my cart? Thanks

Hello:My window is right opening. I need the replacement for this one window. Please let me know if you have it and how much will it cost. Thank you Kiran

does this dual arm operator 39- 032 accept a 11/32 handle? If so, does it come in bronze and have the locking screw to hold the handle in place? Thanks, Cliff

I have to replace the entire mechanism on this window! The knob, the track part and the insides!! Can you help me!? The knob came off in my hand and it was downhill after that! Thank you!!

45273 crank mechanism, L31539 short curved arm about 3 1/4 inches, 20748 connecting arm about 3 inches, bar on sash is 11 3/8 inches, stainless guide is about 10 inches.Main arm is about 9 1/2 inches long.

Just moved into a new house w/ breezeway but all the breezeway casement windows appear to be garbage so trying to replace parts to at least get all the 10 windows operational for now before we eventually do major overhaul. About 50% of the casement cranks are broken (handle won't attach/engage cran ... (cont.)

I have multiple handles on my crank outs where the handle and the worm gear come right out. Wondering if these are replaceable?

i need help identifying this window crank. this is the right window and the left is one is missing. previous tenants broke it and tossed it

Looking for this part for a 10 years old Marvin casement window. The handle is a non folding handle (the new cranck have a folding handle. I am not sure if the cranks are the same or the older ones (the ones I have) are different.On the arm it stamped: Truth 40754 R

The roller at the end of my left opening window is all chewed up. It falls out of the track underneither the window. Any ideas on where to get a replacement roller?

Looking for a TRUTH Hardware "Entrygard" Dual Arm Operator - Short Link - (Left Hand). part number 30757LH. Unit is attached to a 11 3/4 inch window sill. Window size is 34 X 12 inches. Do not know the window manufacturer name. Thank you!

The worm screw does not stay seated and so it will open but not close the window. To close the window I can turn it counter clock-wise and pull it in. I notice that the screw worm wants to come out. May all it needs is a retainer clip. The teeth on gears appear to be good. The screw worm looks w ... (cont.)