Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Please help me order the right replacement parts for this windows, left and right side. The sprockets are stripped. Also would like to replace the handle with a foldiing cover and handle. Thanks.

I have a casement window that will not close all the way. How can I repair it? What needs to be replaced? Thank you!

Hi, I looking for a few of these Crestline window crank. I hope you can help. Thanks!

L 31538 and 40753 are the numbers stamped on the metal parts of the operator arms. It looks similar to what others have posted here..

the gears to open the window do not work. Plastic casing over the gear and crank is Caradco.

I am looking for a casement operator and have included two photos. There appears to be a part number on the back: C-1081-101 with a number 2 in the lower right corner. I also need a replacement handle and have included a picture. The handle swivels to nest into a plastic holder that also covers ... (cont.)

Can you tell me what I need to order to replace the entire mechanism? The long bar is 11 6/8 long that goes on the inside of the window that opens.

I have an old casement window that I can't open/close. The mechanism cracked and the whole thing needs to be replaced. This is the part. Do you have this replacement part? The window itself does not need to be replaced. Can you help?

Hi, I believe this is a crank from a Marvin Casement window installed in the 1980s Number on the 2 piece arm is L30841. Number or the base plate is 40372. Long arm is 9" the straight part of the arm with 2 sections is 4" and the bent section is 3-1/4" The base is 5" by 2-1/8".

I need a crank and cover for a 1994 semco casement window. Can you help please

Truth EntryGard I have two sets of windows in need of complete operator replacement. These pictured are both marked with R(assuming right hand window if viewing from outside), as the Left operators are still installed (I will need to replace those as well). The long arm is marked 40754 and the sho ... (cont.)

Windows hinge on outside at left, so it appears that product number 39-031 are the ones that we need, but please confirm. Long arm measurement on your website is very helpful. Our arms measure 10 3/4" to the screw. Short arm is 4 7/16". We need 2 operators and 5 cranks.

What are the replacement parts? For left and right? The arm is 9".

Have 2 casement sash windows with Truth hardware. Operator on Right side is broken and I need replacement plus 3 sash locks. The photo is of the operational side but to show what we need. The other side that doesn't work has the little black part in the corner that seems to slide and isn't attach ... (cont.)

Need replacements 3 left and 3 right. The arm is 9.5 inches

Looking for replacement hardware for this Pozzi window. Need entire assembly please. Please advise if you can help.

Good morning, Please can you help me in finding the correct parts for the pin holding the bracket 20810 to the lower bracket that is screwed on the lower windows frame, as well the metal block bracket that holds the pin. Also if you would be so kind and inform me of the part number of the screws hol ... (cont.)

I am searching for these, I need 4 rights, 4 lefts and 8 new cranks and covers. Can you help me?

I need help figuring out which hardware to buy to fix my window can you help me?

I need a replacement for the opening hardware for the window in the attached picture. I have not been able to remove it yet. I'm hoping the pictures will be adequate for ordering the correct parts.Crestline Casement Window Hardware. Left hand open. House built in 1992.