Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Entry Guard 20755 Caradco window.

I need to replace two split arm operator

Trying to figure out what to use to replace the Truth operator shown. The number stamped on the hinged arm is 30637 and the arm os about 4.5" long. The long arm is about 9" long. On the rotator cover, the number stamped is 30710.

I am looking for the sash lock and the sash pivot for the double hung. And the operator and cover on the casement window. the casement operator has the number 31538 stamped on the split arm and EntryGard truth on the straight arm.

The arm mechanism on the bottom has the # 30A72 RH. Then on the top is 20810If you can please give us some information This house was built in 1989 if this helpsLet me know if you need any more informationThank you for your time Cheryl

Mike

I need a new one please! I was sent part # 39-156 It was a very close fit but the arms were different lengths. I need those arm lengths at 4-7/8" and about 10-7/8" based on the lengths posted for the part you sent me. All else seemed to be fine. Also I need to know if I'll need another crank handle ... (cont.)

I need to purchase immediately replacement assembly (complete assembly) for several of my casement windows. Need to identify the correct P/N before placing orders. Please help expedite (photos sent already). Bob

Casement window is Twin light horizontal series 850.This is the left window and opens outside to the left when the cranks is operated. Standing inside the lock or closure mechanism is on the right side. The serrated shaft that is attached to the handle that comes from the mechanism is broken. The sh ... (cont.)

Truth. Entrygard 31512 I need two of that and two of the white one

Hand crank left side of window looking outDoes not close at the bottom of the hinge sidePhotos attachedClancy

Hello,I need to replace a left-handed Truth Entrygard for my window. Crank opens, but no longer shuts. Opposite of what is depicted photos. Need left crank, not right crank. What part do I order?ty,F.

This says Entry Guard truth, metal attached to window is 11 1/4", arm coming out is Approximately 8 1/2 to 9". This window cranks out to the left when you ard facing it. What actuator would this be to replace it? There are (4) phillips screws holding it in place, but window casement is the way to ... (cont.)

I have a Truth window crank that is no longer working properly. It seems as if something has been stripped, as the window does not move when you rotate the handle. In addition to the picture I have attached, it is shown as an Entry Guard, with two numbers visible: 20810 and L30841. The windows were ... (cont.)

The long brass bar has printed on it: "Entry Gard Truth" The shorter dog-legged brass bar has on it: "30842R" You can see both the above by expanding the picture. \

rail into which the nylon wheel slots is 13.5 inches long

As you can see in the pictures, the gear mechanism for the swingarm on these discontinued certainteed windows has broken inside of the window, I was hoping I could get help identifying the part numbers and get a price quote so I can replace the mechanism.

I have Kolbe and Kolbe windows and need part #6791. Entry guard is marked on the piece.

Hello,I need to replace some window cranks. I've attached some pictures. On the casing it says KK. The number on the crank itself says 20810. There's another number that says 6N91. Can you please direct me to which one of your products would work to replace these please?Thanks,JT ... (cont.)

Need replacement parts for wood sill stop