Viewing all customer Discussions for:

39-075 Lenahan Window Crank

The previous home owner left us 3 broken cranks for our awning windows. House was built in 1957 and no one knows when the sunroom was added. Inspection missed this and we are now responsible for an unknown age and brand of window repair. Previous owner screwed windows shut because cranks will open w ... (cont.)

This looks like the Pan am/Daryl operator except the two wholes to the bottom on.mine are One inch from center not

Good Afternoon, Here are the pics of the broken window operator we are looking for. Any assistance is appreciated. Thank you!

Hi, I attached 5 photos to assist in identifying the correct replacement window crank. Dimension between top two holes: 1/2" Dimension between bottom two holes: 13/16" Dimension from top holes to bottom holes: 5 1/4" The crank innards must have been attached to the window, so I don't have it with m ... (cont.)

Hello, thank you for your time. I'm seeking to replace the pictured windows crank and its left hand partner. Youre Lenahan Window crank, 39-075, is almost a perfect match, however the length of the arm that actuates the louvers is 2 11/16" while mine is 2 3/16" Do you have a model that replaces m ... (cont.)

Good afternoon I'm looking for 3 of these cranks in left side and 1 for right side The hanging arm measures 2 5/8" Thank you

Hi, I have some awning window in house that won't open. I need to replace crank. I have attached a picture. Can u help me select the correct one?

Awning window from the 60's possibly. Hole to hole on actuator 2.5" length hole to hole 5". Top holes 7/16" hole to hole.

I'm having trouble finding this specific version of an awning operator that needs replacement.

Hi, I need at least two of these cranks. My measurements might not be exact, since I don't see as well as I used too. We replaced eleven of them so far, but of course then one of the last two original ones died. :( I used to get these from HR Hardware, but they apparently went out of business. Any h ... (cont.)

Hello In dire need of a replacement crank operator. Picures attached but in case you cannot see, the words written on the shaft is L LEMCO CROFT METAL PRODUCT MCCOMB MISS PATENT NO [***I cannot read all of the numbers***] 28306?? 2852?? 64???

Can you help me on this? I am attaching a picture of the part I need to replace. Do you have this? I measured the following: 5 3/4" long 2" deep 1" wide If you have the part I would like to order it. Much appreciated. Best regards,

I cannot find any markings on the window or parts. The windows are probably 55 to 60 years old. It is the threads on the piece that attaches the handle to the opener that have worn off. I hope you can help me.

how do you determine if the crank is left or right hand cranks

Need replacements for old window cranks. House is old and nothing is standard. Can't identify manufacturer, although Swisco seems to be very close, if not it exactly. Crank base has the following part no engraved inside: PT NO 10-9231-LH-4.

I have some tripane window from the 70s that open to the outside from and side crank. The handle fell off and will not screw back in. These are awning windows with three panes in a breezeway. Would measurements of the handle help? Thanks.I am not sure if I need a replacement part and which one to ge ... (cont.)

We are renovating our house. We are still using the old windows but it seems that the handles are broken. Were wondering if someone can help us find an exact match. The number on the handle says 60-C-11500-11 PAT PEND.

hi need to replace several mechanisms, of course no manufacture part number 3/8 pin connection on arm, arm pin hole centers are 2 7/8 , mounting screw hole centers are for height 5 1/4,and 7/16 centers and 1 3/16 centers for the last set of holes. Hopefullly my info isn't to confusing ... (cont.)

Hello I am trying to find replacements left and right for the depicted operators. They have the following #'s inside the body. Pat. No. D-198 202 U.S.RD 1963 Can. 11500-4. I believe these are the numbers some are obscured.Thanks in advance.Mike

Hello. I am looking for the window operators in the attached pictures please. I need both left and right side operators. Can you assist pls? Thank you