Viewing all customer Discussions for:

Door & Window

Not sure if this is the right part number and I was hoping you could check? 39316? Gear is stripped out handle and clip are ok. There also is a number on the one arm 30905.

Can't find replacement

Hello looking to purchase new locking assemblie for my slider . Thanks Wes

I am looking to replace this operate assembly

I am looking for replacement balances for these windows Proview Double Hung Windows - see pictures of the model numbers and manufacture stickers

Hello, i am looking for a replacement part for my window. The spring is damaged and need to replace the part. I could not find any visible markings other than a 2 in red marker. Both side have the same 2 on them

Replacement window lock

Hi - I'm looking for replacement rollers for this door. Any help appreciated!

Hi, Cannot find this part ANYWHERE. The corner block itself is 3/4" square and 7/16" thick. The legs that slide into the channels are 3/8" thick, 1/2" wide, and 1" long. The standoff spacer on the block is 1/2" high. Please advise if you have something matching this description. Thanks. ... (cont.)

Hello,I am looking for the replacement for my window channel balances. The length of its metal part is 28 inches. The product code, the widths and the depth are in the uploaded images. Please let me know if you have the replacement for it.Thank you,Tony

What are the part numbers for the mounting AND adjusting screws needed for the 81-095 roller assembly?Respectfully, Tracy

What is the proper pivot shoe to replace these broken ones with

Hi,The string to the balance spring on the left side of my window broke and I wanted to by the replacement part (the whole balance spring). Enclosed are the images of the balance spring along with the label attached to the window frame.I also need to purchase the take-out cliff to go along with the ... (cont.)

Arm falls out of the track due to the bottom cell plastic pieces, broken so window jumps off the bottom track would like to replace all the mechanisms both tracks handle crank

2 Windows are identical with the following information: 14-4 part numbers - QTY 4 (14 1/8" shaft) 1 Window appears to be identical but may be 1/16" shorter or less: 14-3 part numbers - QTY 2 (14 1/8" or 1/16" less, but marginal) I have a few more pics if you need them.

Metal Channel Length - 29 & 5/8"Stamp printed on balancer - 26 6, photo uploadedWindow manufacturer - MilgardNeed 2 balancers

I would like to order replacement latches for my windows. I purchased some at the local store, but they were the wrong length. Please see attached photo with measurement illustrated.

Wish to replace the handle set

Let us know if you have them in stock Brand: Window Repair Systems 4.7 4.7 out of 5 stars 30 24" Caldwell Series 300 5/8" Channel Block & Tackle Window Balance Thanks

Where can I buy these Locks