Viewing all customer Discussions for:

Door & Window

I need to order a set of spiral balances and a charging tool red cap 17" 3/8" diameter

Paramount Vinyl Windows. I have a couple of cords that have snapped in the single hung window shown. The part has a cord with a clip on them as shown. What is this part and how do I replace it? And where do I get the part? Single hung windows 34x58 interior dimension. Would like to order some p ... (cont.)

Crank handle

I attached (2) images of the pivot pin that broke off from the window. The remaining portion is still being held on by one of two rivets that is in the window frame. I will need to drill the rivets out to retrieve it. I believe the portion that is in the frame is just a straight piece with holes ... (cont.)

Have a 1989 carver 3807 aft my, looking to replace salon window felt.

I'm looking for an end connectors for our pencil grids the size of the grid is 5.5 X 7.5

This is the part we need

Do you offer this in 1 3/4" or have alternate?

Need two of these to replace worn out window balances in the shower master bedroom. Small vent type window The channel measures 1/2 " if that's any help. Thank

Hi, We are need to replace the hardware and handles for some existing doors and needing some help finding the correct size mortise lock, keeper plate, and handles. Please call or email to help us determine the parts we need to order. Thanks Best Regards, Ian

Needs Custom Balances.

looking to get this window pivot shoe lock and cant seem to find it on your site

I have five windows in my home exactly the same. 64" from bottom to top. Lower window is the only part that moves. And when I open it up, it will not stay open. It slams down hard. I've taken two of the windows apart (ie, removed the balance and pivot feet). I'd like to replace all the springs and f ... (cont.)

I need a white sliding glass door handle for my 6' sliding door. The mounting holes are 5 15/16" apart

Hi, I would like to replace my two Milgurd sliding glass door locks with keyed locks. Can you please advise on the compatible lock?

I'm assuming I have a 29 inch metal part 5/8 inch thick which would make it a 600 series then I'm also assuming I have a 9/16 inch shoe pivot and then a 3 inch metal pivot bar I think I also need a tool to do the spiral balance charging And I'm not sure if you sell sash stops because I don't have an ... (cont.)

Hello,I need replacement screen retainer clips for my Rollyson DH-c45 Series 2500 window screens. I do not wise to have mismatched clips on my windows. I would like, if possible to replaces the damaged clips on several of my windows. Please find attached several photos of the screen clips in quest ... (cont.)

I ordered the new steel rollers and installed them into our peachtree screen door. They appear to be working fine, except the door will not stay on the tracks when we move it. We cleaned the track and lubricated it with silicone lubricant, but it still jumps the track. Any suggestions? ... (cont.)

Length. 2 1/2" Width. 1. 1/4"" Depth: 1/2" Markings. 9533-2. 2

Request you to please quote us on attached pictures Left hand and right hand