Viewing all customer Discussions for:

Door & Window

Working on a project and need help finding the following Lindsay double hung parts: Pivot Bars, Lift Rails and Balancers. The window are approximately 22 years old.I have included a pic with a window tag which may help identify further. Any help you can give me would be appreciated. ... (cont.)

Hello. I have gaps on my two sliding glass doors at the very top corners of the sliding door when you look at the doors from the side at the very top. I also have a gap where you see the white tape at the very top of the middle of one of the doors where the doors come together. Any recommendations? ... (cont.)

Good morning,This Certainteed Coil Balance is from an approx. year1914 or prior vinyl Dbl. Hung sash. A piece snapped off the plastic Spring Cover.Can this be replaced? I will need 6-12.Thank you,Gail @ Towne Glass

I am reaching out regarding the BF Rich vinyl/tilt-in windows I have, which are equipped with sliding half screens featuring latches. Unfortunately, a few of these screen latches have broken tips and require replacement. I noticed that your 91-001P window latch set appears to be a perfect dimensiona ... (cont.)

Hi, I am looking for 2 replacement balances for my tilt windows. I have attached 4 pictures below. Thank You, Stacy

The window slides in a groove which is curved at both ends. One panel slides over the fixed panel in a horizontal track. The thermo-pane windows were installed during a house addition in the 1960's.

Pivot set right hand and left hand

I am trying to find this somewhere. The previous owner cannot find the keys for this door. I want to find a similar lock so I can use the door.

Metal frame Channel Length: 25 5/8 inches Stamp 25 3 Manufacturer :BSI Channel thickness 5/8 Total alance length including top and bottom bracket is 27 1/4 inches Need 4

Hi, I bought some top tilt latches # 26-471 from your site and the width is fine but they are a tiny bit too short. I need longer ones. There are no labels on the window so don't know the model. They are at least 10 years old from a previous owner. Thanks

Can you help me find a pair of these pivot bars?

Dear SwiscoI want to order parts however cannot figure out the part numbers. Want to replace the channel balances and top sash guides. Metal part of the channel balance is 37 inches. There is a number 3650 on the side of the channel balance.Much appreciated.Francois

Looking for these window replacement parts for the following items:Window roller 9/16" X 1 3/8" X 1Window round wheel 1/4"Window Seal Strip bottom= 1/4" height 3/16, gray color Please see attached photos

I am looking for a handle and lock compatible with PAT# 6.264.252 The problems I am experiencing are the following 1. No key for lock in my possession 2. Handles are loose, screws that fasten the handles through the mortise appear to be slipping when I tighten them Are you able to suggest the best ... (cont.)

I ordered and received replacement parts. The parts were all correct. I forgot to order one part. It is the link bar connecting the crank assembly to the window. It is approx 3 inches long. I am sorry I don't have the part to measure it. Can you identify the part from the order number I refere ... (cont.)

I need help identifying this window glazing bead. I've looked all over the internet qnc can not locate this glazing bead. OMG! I didn't think it be this hard! Please help

Hi, I'm looking for a window operator for my mother.

Windows are less than 2 years old- looking for a couple of these window tilt locks for some have been lost and maybe get a couple extra just incase. I do have a couple other pics. Larry

I don't have the old crank got lost during construction. The window is 25 years old, I need a 24" white window crank. Can you help with this? Thank you~

Looking for new rollers for above door.