Viewing all customer Discussions for:

Door & Window

Measurement is 12 inches. Markings are 11 1 DS Caldwell

Shower door glide replacement. The door is around 20 years old. Do you carry these?

These are pictures of a good pivot bars on my windows. I need about 8 replacement pieces but can't find in you parts list. I am reluctant to take one apart without being able to replace. Also these are riveted in not screwed, so I am not sure about the procedure to replace. The windows were inst ... (cont.)

I am trying to find replacement hinges for crestline windows. They were installed in 2003 by our contractor and purchased through our local lumber yard named United Building Company, Boone, Iowa.

This is for a Anderson casement window. Look out of the house it's the Right window

Window measures 33.25" w, 29" h, and the coil is a triple coil that is 4.5" long. The opening of the window track seems to be 0.78" wide.

Attached are a few photos of the patio door handle set up from various angles, that was installed in 2009 with my custom Bonneville patio doors. As you can see, the handle is fairly destroyed. I'm looking to replace this part. I measured the full height / length of the handle (7 1/4" inches) — ... (cont.)

i need the replacement slider part that latches into what is mounted in window

Do you sell a concave roller that will work with .250 foam spline? I am rescreening Andersen 200 series window screens that came equipt with metal spline.

I am looking for a replacement for this triple coil balance. I've uploaded pictures including dimension. all three coils have a 10 stamped on them. I've found similar balance/shoes with these dimensions, but I am not sure about compatability.

Im trying to replace the glazing around a (25+yrs old) window panel I replaced. The hardware store didn't have the correct shape so they sent me here.

Installed in 1999.Arm is 9”, but distance between screws is 4 and 7/16”.Thanks,Jane

Trying to match up this crank from back in 2001. Looks a lot like you 39-253LB except my white cover is affixed and does not come off. Original manufacturer was Truth Hardware #31876 stamped on bottom of one of the arms

Hello. Would this fit our K&K windows?Here are some photos. Marking says Truth Entry Gard.

Usually I can find out a balance just from experience but this one was odd/Unkown to me because I usually always see coil balances on double hungs but this one is on a single hung. They're marked 11L and 11R for left and right. I provided dimensions of the balance housing and how to balance mounts t ... (cont.)

7/8" wider from casement window. Looking for a match

I need to find replacement locks for sliding windows

I took a photo. I'm not sure what brand it is, but I need a window crank.

Coil balance is 3/4" wide and the sash weighs around 27 lbs. I found part S170-409 but I am not sure the weight limit. No stamp on balance.

Need Crank handle and Cover to Match the ones attached. Window Stamp is attached as well as close ups of Handle and Mechanical Cover.