Viewing all customer Discussions for:

Door & Window

Please can you tell me if you have this piece that I need. I need the crank (photo attached) for a casement window, left side. I can add more photos of needed.

looking for these balances

Harvey crank out casement right lower sash arm plastic glide broke and need replacement. Sash is 12". Can I get replacement part or do I need the entire assembly?

On each part 02 is found on wheel assembly.Frame width 1 inch,Length 3-1/8 wheel 1 inch

My double hung windows (36 inchesX42 inches) spring balance broke. Window won't stay open.Can you tell by looking at enclosed photos parts I need to order to repair.

The handle as shown in photo fell off the wondow and I cannot find the missing bolt to reattach. Probably the cat rolled it under something. Can you please help with any needed replacement parts?

I can't see a manufacturer name on these windows and I have many that no longer function properly. Hopefully you can identify and have replacement stock. Thanks

29 inches long not including moving piece the sash pivot bar.

Patent number2732726. I need a few right hand and left hand cranks that will replace these. Several of them have stripped aluminum gears inside the crank.

Hi, can you please tell me if you have a replacement operator for this one shown? It's a wood window. Swings out and inges right from the interior side. from the center of the crank gear to the center of the pivot is 9". I took 2 photos for reference. Thank you Dave

I do not see any in parts search. I have a bunch of screens to repair, please help! Thanks Peter

length of the metal channel: 18 11/16 stamp is printed on it: 18 5 who manufactured your window: Milgard, 2005 need one balance

I need the 3 pieces in the picture

25.4

20 inch metal, 1940 stamp, the window is manufactured by Jeld-Wen. It is 1/2" wide. I need 2 replacement balance springs.

Need 6

Hopefully you can help find this part.Thanks, William

On the left side , there is a metal piece missing. On the right side with red ink, I circled the metal strip that is needed . Please help me to identify this long thin strip. Thanks, Nancy

Can you help. Rich

1.5 inches x 1/8 x 1/8. Need 6 pics