Viewing all customer Discussions for:

Door & Window

The attached picture shows the broken handle that needs replacement.

I have a Certainteed casement window and I need a new crank for it. The mechanism works just fine but the handle has split. Can you help me?

I am looking for American Craftsman white casement window handles. I have photos if that will help.Added photos. Number on back is 2108.

Pennco windows05/16/2005 2180-SH-2850 open dash 3c100w3260

No markings on the roller. 1.5" metal roller, 2-1/4" long from wheel edge to outside of screw housing, 1-5/16" tall, 7/16" wide (~5/8" with roller stem)

Length of metal channel = 22.5" Stamp printed = 22 4 Unknown manufacturer Wings on both ends We will need 2 balances.

86A 27-5 AA2 CMC 7 winged top

I'm looking for a left side opener for an Anderson casement window. The gear is skipping. I did not remove the wood trim, but the arm is between 10 and 11 inches long. The hardware with the crank handle is 4 inches wide. Can you help?

Hello, I am looking to replace our old and nonfunctioning window cranks, but I have now idea which window crank to order. The long arm measures 8" and the shorter arm measures 5 1/2" . The cranks that need replacing operate a window that opens on left. Thank you!

This is the clip that keeps the door open

I Want toput a key lock to existing GUARDIAN patio door handle for opening from outside.

My door has the following listed on the frame - ali ti-1 astm e-2190-arg Series 411 - Double sliding door - frame size 71.5x 95.5I(see photo for more information). The lock has broken(I think a spring inside). I know you sell replacement parts but I am looking to know the actual manufacture of th ... (cont.)

I need this tilt lock

Simonton window tilt latch. 2 5/8" wide on top, 5/8" deep, 5/16" height.

Installed part is on bottom of window

We need two of the balance shoes shown in the picture. The size is 1-1/4"Wide x 2" tall x 1/2" thick for a 19-7/8 sprial tube assembly

We are looking for (6) 23" and (2) 22-3/4" spiral balances we need the bottom part as shown in picture 002 (the thickness is 5/8" and width is 1-1/4" height is 2". ) on the first picture, the space between the metal knobs is 1/2". The tube is 3/8" diameter.

Can't find any manufacturer markings on this door. need whole new handle and lock assembly. Handle measures 6 3/4 inches from hole to hole and 7 1/4 inches overall length. Please help. Thanks

Hello I have Crestline double hung windows and I'm looking for the pivot arm. The code on the window is V25604V69C5M. These were installed in 2004 if that is helpful. Please see attached Thank you!

We have approximately 15 yr old clad wood Peachtree window about 35 x 60 for the operable frame. We need to find a new operator. Instructions on how to remove the existing operator would be appreciated as well.