Viewing all customer Discussions for:

Door & Window

West Window Corp series 7300, spec C-C55

Need replacement handle for SGD-R35-72x80 sliding glass door. Inner handle broke.

CPD: PWG-M-003 (PTC) Rating H-LC30 1219 X 2438 (48 X 96

White vinyl / Single hung for tilting inward / Surface mounted / Spring loadedScrew holes: 2" spacing from center of screw to center of screwBase Length: 2+7/8" Base Width: 7/8" Center of hole (closest to end with latch) to end of base:: 5/8"Pair: right and left neededThank you... ... (cont.)

Windows hardware gear drive 18 R

Hello,I need to replace this part for several andersen windows from 1985ish.can you please identify the part I need with the picture attached?Also is there a difference between the left and right side?Thank you Lynn

Please give me a call when you get a chance. Thanks Ken

I have a few broken pieces: 1) Photo with yellow circle: latch mechanism is broken off on other side (this is a photo of the side that still has the piece for reference) Photo with red and blue arrows: 2) Silver bracket is broken and needs replaced 3) black plastic piece on hinge that connects ... (cont.)

894 screen corners with pull.

looking to replace a latch on my casement window that only has the paten number of 4674777 on it and no other id. the mounting holes are 2.5 inches apart. I have not been able to get a photo of it yet.

How do I know which size I need? Here's an example of one operator. I need a dozen or more.

I have a Pella storm door Reg. No. 11170090170 (0021). I am looking for the inside latch/lock. Please advise price and availability.

I need a channel balance complete with the shoe 28 inches long and 1/2 inch wideScrews into frame with 1 screw hole at topOld shoe snapped off and broke at bottom where it screws into window, will need complete device to attach to frame and double pane window bottom

25.5 inches long metal channel, 9/16th wide. Stamped 25 5 B.S.I. PP. Windows are Milgard, about 15 years old.. looking to replace the balance units on two identical windows. So I am looking for 4 balances. Thank you, Wolf

Hello,Several of my truth ties have broken.I'm looking for (4) Can you help me?THanks,Frank

I am trying to order a wheel assembly for my screen door, the part that comes closest to what I need is Part # 84-016 but as you can see from my attached picture, what I need has a hook on the left side not a hole.

The window is a bay window made of vinyl

The upper sash has three metal tape type balances per side these connect to the vinyl piece that the sash pivots in and out of to remove the window. Two pieces of the metal tape go to the back of the sash track and one goes to the front they all run down to a final piece that is broken away from the ... (cont.)

previous owners of house threw them away during clean up of house. I'm doing repair work for new owners. these are about 4' long thank you for helping

Trying to locate this window snap latch