Viewing all customer Discussions for:

Door & Window

It measures 24 1/2, 1/2 inch width and depth.

I have this vinal door and the interior latch is broken and I need a replacement. The latch has 4 hooks that comes out and the length of the latch is approximately 64in

We are hoping to replace the stripped portion of this window's hardware (shaft where the crank connects). The house was built in 1959. Thanks for your help!

27 inches long Stamp 2630

Hello, can you help me identify these parts, they are from a home with 20 year old Milgaard windows and door

Need latches for tilt out windows. These slide in from the side of the sash and the larger slide bar snaps in on the top. No brand identifier. Need left and right for 3 windows.

Metal hook fittings. Metal channel L =22". Stamp: 21. 2. KQ. CALDWELL. Manufacturer : unknown. Amount needed: 2

2 coil springs in each side. Need left and right side for one window. Double pane sash approximately 30 inches wide by 24 inches high. I did not measure, but that should be close if that helps with weight determination. There is no cutout in the spring channel - assuming I will have to cut that. I ... (cont.)

Wood Mode caninets

Could you please direct me on your website where I could purchase these items. Also the tool necessary to fix the pivots.

Need: 20 3 KW CMC 7 26 4 KW CMC 7 Do you have these available?

This part of my window is broken. I cannot pivot the window. I also need the rubber strip that goes on the bottom of the window

Looking for screen door latch and pull

I'm seeking a glazing bead as shown in the attached images.

Can you give me a price for S795 balance with 15-194 shoe and 15-198 hook. I need 4. Thanks

I have five wooden casement windows where the worm gear is stripped so that the handle just spins. It sounds like the only option is to replace them. I have included pictures. The general brand is K K but the only number I could see is- 20810 4 of the windows are the same size, one is smaller. I ... (cont.)

Sticker on window numbers 704686 05112AL1 3001 window size 30 5/8 x 39 1/2 white Vyl DH 88WT-16-9

Can't identify channel balance 3/8".3/8" ribbed I rechecked the channel balance measurement and it is 3/8 inch.

Hello, Attached are photos of a channel balance that I have to replace (both sides of window). The length of the channel portion is 29". The stamp '28 3 JO Caldwell' is displayed on the channel. The window weight is approximately 20lbs. After reading some previous posts, I noticed that a take o ... (cont.)

Hi, DO you carry this type of window balance? Thank you,