Viewing all customer Discussions for:

Door & Window

Hello, I know the pivot bars I need that match up to mine are 26-226. But I'm unsure what pivot locking shoe works with that. I know the shoe is 1/2" thick and 1 1/4 wide, about 2" tall. Thank you

Hello, I have a few windows that will not stay up by themselves. I think I need a pivot lock brake but not sure. I also read that the new pivot locks don't match up with the metal post at the bottom of the window that latches to it. Any help would be appreciated. Thanks, Mark

This bead came off a metal door/window from a 30 yr old morton building.

Hi there! I am renovating a midcentury modern home with original aluminum sliders (1960). These little wheels that allow the window to glide are needing to be replaced. I've heard great things about your offerings! The plastic wheel itself measures 3/16" thick and 11/16" across. The gap in the botto ... (cont.)

Lock for double hung window

Can the metal part be replaced or reused?

Looking for replacement for this contraption. Window. Won't stay open. Thanks

F1015 SS Installed 08/08/2006 2CWP FCSHWIV429.313x34.625 PI@8 06520466010011 WH A7 i7

Hi I am looking for a corner bracket like this one!

I ordered the 90-063B but it was too thick. The photo with the ink pen is what I purchased but the photo labeled C is what we need. Can you help to identify if you have anything that would be compatible?

one size marked 13 2 (need qty 6) metal channel measure 13-1/2" other marked 19 4 (need qty 6) metal channel measure 19-1/2" Both have same ends.

Can you tell me what pivot shoe I need base on this photo

Need a new 1 cant find any part numbers anywhere

Need long rod and mechanism to open an Andersen 100 Series awning window that is about 12 feet high

Hello. I moved to the house with the windows I can not identify. The peace I am sending you is broken - I wonder if you can help me to order (or identify) and to replace it properly. Thank you

It's 9/16 wide and 34" long Markings 33 3, 3.S.1 PA

please help identify

Good Morning, I was hoping to for some help. I just bought a house and the balances in the windows are mostly rusted out. The windows are aluminum single hung, non-tilt. Other than the balances, the windows are in good shape. I've done this repair in the past, but am running into a slight issue i ... (cont.)

These windows are about 20 years old and were installed before we purchased the home. Both bathroom windows failed in the same manner, the coil spring snapped, leaving the window unable to hold itself open. Each window has two springs and each spring is stamped 6R. Thanks for the help! ... (cont.)

I measured it at 1/2 thick and 1 1/4 width