Viewing all customer Discussions for:

Door & Window

Looking to find a replacement for our Kimo window in our manufactured home. Fitting is 27" but I can't see the photos well enough to make a decision. Any advice from these photos? Also what spring tension should I be looking for?

top "square U" width approx 5.95mm, length from top to bottom is approx 18.5mm, bottom fold is approx 6.6mm, top inside lip against the window is approx 2.15mmWhite color. Can you find this piece in your portfolio?thanks,Paul

Not sure which part I need.

CR-CN/ALL C2-C45 1361408R C-9400-JB

2 wheel roller assembly with inscription "Product of Del Mar ENG, CO. Long Beach, CA" Wheels are 1.25" diameter Height of outer sheet metal part is 1.25" near adjustment screw

Balancer

Hello my windows are thirty years old need to replace the balancers i show the stamping form one of them What do suggest for replacements?

Looking for locks and weather stripping

Kolby and Kolby double hung window. This spring loaded lower shash is broken. 34-3/16 long

I'm looking to get a vinyl window flashing of this style for my single hung window. Do you carry this style or can point me in the correct direction?

Please see attached need replacement parts asap

Hi! My contractor cannot find this part, which js broken on two doors from the 90s is there a suitable replacement?

Good morning,Does your company have this part and other parts for our Jilco Windows?At your convenience please let me know Thank you

13

I need two window channel balances 86 26-4 JA5 CM 2I need two of these Channel balances. 27" around .5 inches wide. Stamp code is 86 26-4 JA5 CMC 2

would likely replace whole mechanism, this is an awning type window, and it cranks the bottom of the window out

Inserts of 1 1/4" rollers from 30" x 75" sliding glass door and I left the exterior on bottom of door but I can get and take pictures if needed

The pivot bar is missing from the window

I have a broken Balance Cover on my Simonton Window. Not sure which part to get to replace and would I need to replace the spring and shoe as well? How do I find out the weight that I need? Thank you!!!

I can't find any door identifiers on this door, but these are the measurements of the rollers. Housing: 2 13/16" x 1 7/8" x 5/8"Wheel: 1 1/2" x 3/8 Flange is 1 1/8" wide