Viewing all customer Discussions for:

Door & Window

Images

From metal to metal it's about 12 5/8, wings on the plastic part top and bottom. Back of metal stamp says 12 5 B.S.I. OA.

Hello, We have Pella insert windows that need the seal replaced. What product do we need. I believe we have 17 windows between 24 and 36 inches wide. Thank you,

Hello. Trying to identify this hinge for a local college. Please advise if the photos help in any way. Thank you in advance Geoff

Hello, Looking to replace these old ballasts. I have 6 windows that have this size ballast. Smaller windows - I can measure but first wanted to figure out the right hardware. I'm a GC but this is for my own condo. Thanks, Nathan

Hi this is Emily from Glass Doctor Dothan, AL seeing if I can get some help finding the correct replacement balance rod for the attached pictures? Thank you!

Double slider windows that state that they are Milgard series 8120/8130/8170. Sash roller had a A7 on the backside of it. Rollers are vinyl with metal axles. Rollers are worn down.

The mortise lock on my screen door requires replacement. Can you please assist me in determining the specific part needed? Attached is a photo of the lock, measuring 4 3/4 inches in height and 3/4 of an inch in width. The distance between screw holes is approximately 3.5 inches, however the lock app ... (cont.)

This part is out of 40 year old aluminum windows. We have 200 of the windows in our property and these are starting to fail. Do you have anything like this?

SORRY, NO NUMBERS OR NAMES ON THE COILS OR OTHER HARDWARE. THE BALANCE CAME FROM A SIMONTON HURRICANE RATED WINDOW. IT IS A HEAVY TOP WINDOW OF A DOUBLE HUNG WINDOW. I NOW HAVE TWO WINDOWS THAT HAVE THE SAME PROBLEM. BOTH ARE TOP BACK SIDE OF THE DOUBLE HUNG WINDOWS FROM SIMONTON. MFR CODE: SIM- ... (cont.)

I just need to identify this style balancer.

Hello - we had our home built in 2004 with all Anderson double hung windows. We tried to wash the inside and outside of one of the second floor windows by pushing the little clips on the top of the both sides of the bottom window and dropping the bottom window forward and down for cleaning. Then w ... (cont.)

Hello! I need 2 of the window clips like the ones in the pictures attached to this request. Any help identifying which ones they are, would be much appreciated! Thank you!

Hello, I have purchased this item and I see there are a set of holes at the top. the screw goes through both holes but, the holes are different as one side has the metal cut and pushed towards the center of the balance and the other is straight cut. which side of balance contacts the window track? t ... (cont.)

Hello, Please see the attached photos of the sash guide on my windows. Many of my windows are like this where the sash guide is not broken, but the balance still pushes up through. These are the originals to the window built in 2007. Is there an option that would cover that channel better so that th ... (cont.)

I have 22 year old Patriot windows installed by Ryan Homes. Several of the bottom IGU's have failed and appear cloudy. I would like to replace these lower IGU units, not the entire window system. Where do I find replacement IGU's?

What size/weight balance spring recommended for a 48x48 window

Can you help me identify this part.

Is there a replacement (or something close) available for this? Its a vinyl glazing bead 13/16" wide and the 5/16" barb is slightly off center. Its bronze in color. The Semco window was manufactured in 1987.

tHESE LATCHES ARE FOR TILT WINDOWS. THERE IS A RIGHT AND A LEFT. THE LENGTH OF THE LATCH IS 2 & 1/8 INCHES. THE WIDTH IS 5/8 OF AN INCH. OTHER MARKING ON THE LEFT LATCH IS L OVER 17 AND 95 ON THE LITTLE CLIP AT THE BOTTOM. THE RIGHT LATCH IS THE SAME SIZE BUT WITH R OVER 24 AND 96 ON THE LITTLE CLI ... (cont.)