Viewing all customer Discussions for:

Door & Window

I need two new balance boxes for this window. I have attached photo of balancer. Thanks

Need replacement pivot lock shoe. The metal inside broke into pieces. These windows are from home depot: HR windows 2500 series

I just had a double pane glass replaced due to a large crack. The window I am told is Pella and it's incased in wood. The installer couldn't save the glaze bead because it was brittle and cracked and broke. He wasn't able to match it with what he had in stock but mentioned I might be able to locate ... (cont.)

The windows were installed in new construction 2015. Coil springs are completely destroyed on left and right of 1 - 3'x5' window - double pain single hung tilt vinyl window. I have included in pictures all the information I could on the window. Thanks.

Hello, I am looking for replacement for the window glazing that has dried out. I have attached the pictures, it is about .45" deep x 0.51 " , wood frame is 0.69" and glass is 0.53" thick. I would like to replace for several windows, what model of glazing should I get? I did not find of same size ... (cont.)

This piece is like the pivot point when you are cleaning the outsides of the windows. 7cm long x 1cm x 8mm wide. 8254 is the number on it.there is also a 3 on the piece that breaks off.

Looking for clips like this

Looking for clips like this

Need replacement handle/handles For double sliding door

I am looking for these locks. I could not identify the window brand. this is a flush mount lock with a rod that passes through the inner part of the locking mech. I apologize but I did not get any other measurements or pictures yet.

Need crank cover for milguard styleline adobe color casement window.

Serial #'s 103-2 and 102-3 are imprinted on the broken parts. Is the part # 26-175 a close replacement?. It does not look exactly the same but pretty close.

Might you have a Marvin casement window lever ? Thx

Not sure what the name of this window part is which is cracked. Can you please advise if you have this kind of part?

Hello Please help me identify these patio door handles, approx 10 years old installed on sliders in South Florida. Thanks

Hello, I do not know the manufacturer of the sliding glass door. The door has two holes in the front and no screws in the sides for adjustment. So, I think it uses one of the tandem roller designs that you have. I think it is one of the following: 81-018, 81-128, 81-141, 81-149, 81-182, 81-188. A ... (cont.)

I have Kolbe & Kolbe Awning windows. The part that is attached to the window which lets the window slide in it's track when being opened and closed (is it called a 'keeper'?) has broken. It's the black plastic part in the first 2 pictures. The plastic part wraps around a metal body that pivots on ro ... (cont.)

Hello, I have numerous custom wood double hung, non-tilt windows that replaced originals in a 1892 house but have never installed the Caldwell Spiralifts since the house is adjacent to a highway. The window sashes are @20 lbs. The Spiralifts are 5/8" with black tips. I have read your installation gu ... (cont.)

See attached photo for ID the shoe for my 2910 block and tackle

I'm going to attach pictures of the old lock I hope you can help me to identified what's is need it to replace the old lock thanks