Viewing all customer Discussions for:

Door & Window

I'm thinking I need Tilt latches 26-442? Pivot bars either 26-405 or 26-226? Pivot shoes 15-215? Can I just replace the pivot shoe and use the old coil balance? If so how to separate it from the coil balance, I didn't see that in your videos only how to remove the shoe from a different type of coil ... (cont.)

I'm looking for parts for Windjammer 80 tilt in replacement windows from 2003. Do you have this part?

Our Pella window broke recently. From the research we have done, it looks like the part we would need from you is the 1" t-lock balance shoe, closed, part 15-194. Is this correct? Thanks!

We are looking for the sleeve that slides onto the locking mechanism on our casement windows.

Hi, A customer brought in the part in the photos. I took pics of each side. He said he believes the window brand is Magic Windows. This part sits in the window track and I believe he said it pivots or turns. Might allow the window vent to pull in or out for cleaning. Wondering if you can ID and let ... (cont.)

Broken vent latches (I think that's what they are called?).

American CraftsmanDo you sell parts for American Craftsman by Plygem?

11 outside pull standard,DNS industrues,Miami

Hello, I need to replace the balances for an IWC window. Could you help me get the correct ones? I will need 4, 2 for now and 2 more for backup. Thank you.

Hey! I need help finding the right window balance. I know that they are 29-4 (so I know I am looking for 29 inch balances) but I am unsure of the weight. I found block and channel balances on your site have the same clips as mine, but still unsure of the wight and how to figure that out. Both sets o ... (cont.)

See picture. Do you have this latch? Overall length 5 1/4 inches

I am looking for a white vinyl glazing bead as shown in the photo. It is 57.5" long and I need two of them. It is for a Thermal brand window. The contractor that sold the windows to me told me the company, Thermal, is no longer in business and the glazing bead is no longer available. A sticker on ... (cont.)

Need replacement for 2 hinges and one window opener

I am looking for these patio screen rollers

The bottom measures 3-1/2 in. long and 1-5/16 in wide. The screw holes are 2-1/2 in apart. The base is numbered 515-A while the moving part is numbered 515-B. The window itself has no identifying marks. I need two right side latches and one left side latch.

Need to replace window locks. Living in the Northwest, they break easily. Hopefully you can help find correct part for replacement. Thank you.

This roller is used on a Milgard screen door that is approximately 5 years old. The outside diameter of the roller is 1 inch, and the center portion of the bearing extends beyond the roller face by .125 inches. The center portion of the bearing is threaded to accept a mounting screw. Please let m ... (cont.)

I have a window that is hard to open. Tennant sent me this photo. House was built in 2004 if that helps. Thank you.

The clip end of the cord sheered off. I have it back together enough, but need to replace the balances for this window. The window is 51"w x 47"h with a single movable pane. Please help.

The Milgard sibling window rollers came 87-201 and I tried to put them did not work. They were the wrong ones. I attached some pictures to see if you have the right ones.