Viewing all customer Discussions for:

Door & Window

Hello, I need just the plastic clips for the balancer. Do you have any recommended parts.

The Length of the metal is 23 5/8 and the overall length is 25" from end to end and as the picture shows it is stamped 23DS45.

Duct tape is there to pull door closed. latch handle is broken. 2 long screws connect broken handle to outside black door knob. The screws are approx.2" apart. The door was mfg. with precut holes for door knob unit. There was a wire inside door unit also connecting handles. To remove unit, needed t ... (cont.)

Hi - and idea where I can get the leaf stripping that borders my patio door ? The thickness of the material/leaf sections is maybe 1/32" and a semi rigid material . See photos for overall dimensions ! Thanks !!! Help or leads appreciated !! Need like 6 pieces 80" long Kevin Montana - ... (cont.)

I need 2 left and 2 right.

I am in need of your advice as to replacing tile latch assemblies for an Alside vinyl window. I have attached a photo of the left side assembly. It measures 3 and 1/2 inches long by 1 and 1/2 inches wide. The screw holes are 2 inches from center to center. To facilitate the process of determining ... (cont.)

Hi! I would like some help ordering a few parts for a sliding glass door. We have a malfunctioning lock. I have 4 photos attached if you can assist me with ordering a new lock, and strike plate I would appreciate it.

Please quote the following crank handle this is from farley 210 series 17 3/4 x 25 3/4 hinged right casment

Need replacement parts for awning windows in FL. Cranks and latchs.

I'm looking for the black metal part in the photos. It is on the lower part of the window I'm the hinge side. Appears to attach the window to the track.

Both of the left and right latch on this window are broken. I found 26-266 which I believe is the left-hand side, but the matching right-hand side is discontinued. Some of the questions on that product suggest the 26-393 pair, but that is also marked as discontinued. Is there anything available th ... (cont.)

Looking for these

I have a large sliding glass door and my current rollers are very worn and need replacement. The wheels are 1 1/4 in diameter, height is 1 1/8, and width/thickness is about 11/16 inches.See attached pictures and please let me know if you have a suitable replacement roller or need any more informatio ... (cont.)

I do not know the brand but I need a replacement for this multi point lock. The release button seems to be more centered and rectangular. Can you help me find the replacement part?

Channel length - 13.5 inches Stamp - 13 2 Milgard Windows made in 2005 Channels falling out and windows not holding when moved up 20 balances needed

The locking handle is part number 38-091 or 38-092. I ordered those but I need the metal plate that goes on the back side of it that holds it in the frame with screws. In the picture, someone used two small pieces of metal on each end to make it work, but that's not the ideal solution. ... (cont.)

I need one bail for a drawer pull for a Drexel Heritage Dresser. What other information might you need?

Hi, I need to find replacement part for my window sash balance and tackle. The metal measures 28 inches in length by 5/8 inch in width and 5/8 inch in depth. It is stamped w/ B.S.I. 2740. I need to replace these on a few windows and was hoping you could help me find suitable replacements. ... (cont.)

Hi, I'm hoping to get help identifying the appropriate replacement channel balances for two windows. I've attached a set of photos of one of the channel balances. As seen in the photos, there is a stamp on it, 2740. I measured the length at 28". I will need four identical channel balances in all a ... (cont.)

Hello . I'm replacing some parts in an old large storm door. I am looking at the bottom latches and one has broken . The pictures show what I'm looking for. Do you have anything like this. It also has a spring to it.