Viewing all customer Discussions for:

Door & Window

Restoring late 1930s windows with tube balances. The balances are secured to the sash on the bottom of the sash.

I need tilt bars and tilt locks for vinyl replacement windows. Photos of the required parts are attached.

The sash is 35 inches. Broke the small part pictured that the cord threads through.

looking for the whole door lock assembly, The label on the door is gone and I have no idea what kind of door it is

Need 1 pair of the 20C and 1 pair of the 19c with new blocks

I am needing 2 sets of sash releases for an unknown manufacturer. I was told your company would probably have what I needed. I am delighted to find that you also carry the spiral springs. I'll have to measure the diameter as indicated. If you can match the part pictured then half of the task is done ... (cont.)

Photo 1 is the left side with an unbroken part. Photo 2 is the left side with the broken part. The last photo is the sticker that was on the window at purchase. The sticker states they are Alside model A116. That is all the information I have, they were purchased in 2017.

I can't seem to find these anywhere? All the pull tabs have broken off. The windows are on a 6th floor condo windows.Could I just use corners and another type of pull tabs? What are my options?

I had a ROW Casement get caught by the wind in a storm. I need to replace all the hardware, crank mechanism, the linkage top and bottom, and the tracks top and bottom. The track were bent along with the linkage. I am sorry I could not figure out the right hardware to order. I believe it is a left si ... (cont.)

Just need the pivot lock but can't seem to find a replacement. Tried to indentify but no brand name to be seen.

I can barelopen my patio door anymore because I think the rollers are bad. Calling Pella customer service was of little help. I'm attaching pictures of the door and rollers to help identify what it is I need to purchase. Although there is a chance they have been replaced before since this door was ... (cont.)

I am trying to find the replacement part for a simonton single hung window balance spring. I have added photos of the window spec label. Is this something you can help me with? Thanks,Tim

Good morning! I need to order replacement channel balances for some old (but still serviceable) aluminum casement windows. The channel balance measurements are 23 7/8" long, 5/8" deep and 1/2" wide. The only marking on the balance is '2320'. I've attached several photos to show the nylon end section ... (cont.)

I need to purcase Pivot shoes for vertical sliding windows. These shoes connect coil springs to frame and hold a pivot bar which is connectd to the sash. The pivot shoe material is a form of plastic.The thickness of the pivot shoe while in sliding mode is 9/16" the window has a tilt for cleaning mod ... (cont.)

I need to replace 1 pivot shoe and a few coil balances. The only marking is a faint imprint of "8" on the coil balances. Thanks for your help.

Patent number 5697188.

Looking for help identifying which replacement components I need to replace hinge and casement. Thank you!

Hello, I need help locating the replacement hardware for this window. Please let me know if I can do a "best guess" using the photos provided or if a specific measurement is required. I only need the replacement crank hardware pictured. Thank you in advance.

I have a channel balance #28C is 29inches long. Please let me know which one I have to order. Photos attached. Thank you, Miguel

Looking for replacement parts for a customer. This is the info provided to me.