Viewing all customer Discussions for:

Door & Window

Piece under window panel that slips into groove of pivot shoe is broken

I have two Andersen casement windows that measure 28"w x 46"h. I need new operators (brown) with new handles - one left hand and one right hand. Can you help? Thank You.

Concerned on how to get bottom fitting into the frame. 9/16 X 9/16NV Home windows from 2008Thanks Steve

Older sliding door. Had to remove bottom of frame to get the rollers out.

Clip pictures

I'm seeking a window crank to be placed in the area in the attached images.Would this be needing an "L" style window lever? Not a crank?

I have tightened the little screw on the handle but that did not help. I believe the guts are just worn out! TYIA

Single hung, non tilt windows with metal frames on 20 yo house. I thought these are spiral balances but didn't see 2 metal plates under the window panel. A few of my windows are not staying up so I'd love to try replace the balance, but I don't know what kind of balance these are, would you please i ... (cont.)

Need 2 balances Length 29 5/8 ( metal only) Stamp 29

This glazing bead is for M I window Series 480/680. It is 15/16" wide with offset of 7?32" & a 90 degree piece that is 11/16". Hope photos help.

We have a 2 point door lock on our sliders that need replacement. See attached photos and measurements.The door product number from atrium is 332. Thanks Mark I looked at your product # 82-265. but was not sure if it would work?

Hello-Can you please help me identify the correct window channel. I see a lot of pieces that look similar but I am unsure particularly of the footprint.I know the length of the channel is 13'' but have a hard time identifying the right footprint part.I bought my condo and we identified the broken wi ... (cont.)

see pictures the plastic tongue inside lock mechanism broke does this help?

In a newly acquired home I have a sunroom with 6 "double hung" windows that do not appear to have ever properly operated. There are no sash lifts installed on any sash, upper or lower. The mechanism used to keep the sashes in place is some sort of friction-fit steel spring that is just wedged in bet ... (cont.)

Screw pulled out of coil spring crashing it to bottom of the window. It isA Simonton Brickmold 300 single hung installed in 2016. Double spring, #6.0 35. Window weighs 24.5 pounds. Took pictures to help you ID the parts I need. Let me know if you need any more info.Thanks Rich

My home was built in 1995 and I have several of the crank style windows. About 3 of them are stripped (or so I think). What can I do to fix them and what size crank do I need? Thank you

Channel balance for a tilt window. The original balance is stamped with: 15G, B.S.I. The window sash weighs 25 pounds. Length 15", Width 9/16"

DOES THE MORTISE LOCK HAVE UNIVERSAL SWING?

Dear Swisco, My wood double-paned Gienow windows are 16-18 years old. Two of the windows have broken parts that I have not been able to find and the folks who sell Gienow out of Canada are no help. Without this part replaced the windows will not stay opened. I'm pretty sure I also need a fix on t ... (cont.)

Please let me know if you have this availableManuel