Viewing all customer Discussions for:

Door & Window

I need 2 right window latches for a Larson L203E storm window.

I need replacement pivot bars for a silver line upper window sash. I don't know the window model number but the pivot bar part number is 1054. First I tried swisco part number 26-400. Didn't fit. The screw holes didn't line up. The I tried part number 26-369. The holes lined up but the flare was too ... (cont.)

Imprinted on latch is " Canadian patent 919213 and Canada patented 1973. Note latch mechanism goes north to south not reverse like you see on mortise latches Thanx in advance Frank

2005 Jeldwen patio door threshold kerf worn out and need to replace. Nothing that size and design at big box stores except to the sides of doors but too big. Any assistance appreciated. Thank you.

THERE IS A RAISED RIDGE THAT FITS IN THE WINDOW. THE 1 BROKEN IS WHERE ALL THE BREAKS OCCUR.

I need to purchase Pella Window cranks, folding with cover. Will your cranks fit Pella windows?

I need t new window crank mecahnism. Thie is an Anderson Casement. Window from 1989-90 above kitchen sink. Has Truth HW Logo and a #30744 on one part. I need both left and right. The glass window is 18.5" and the longest metal arm is about 9". The crank just does not crank it anymore - handle ... (cont.)

It looks like one you have on the site but mine is flat on one side and measures 3/8 thick.

I have a Perry home built in 2003 and need new glazing around the windows.

These were installed around 1986 when units were built.. I have 3 wood windows, all on right side with lock to left of the handle?when you open, they don't catch as you turn crank so it takes awhile to fully open. Didn't want to completely remove since I needed to close window afterwards? These were ... (cont.)

Looking for replacement double hung window latch patent #5139291 white left side

HelloI need 2 sets of balancers for my Simonton windows. My wife Jill has contacted you before and had balancers and shoes sent here but they were not the same as the ones we have.Joe

No markings or numbers door was here when we moved in 1994

Photos are attached as requested.

This balance's counterpart failed spectacularly: the spring broke while we were in a darkened room watching TV. Sounded like a brick was thrown at the window. Looks like S395, but the lower fitting is 1 3/32 wide.

Hello can you please tell me which parts to order for this sliding glass door roller and housing. Thank you. Width 7/16" Height 1' 3/16" Wheel diameter 1' 1/4"

The metal on the crank mechanism has broken so that the casing is no longer attached to the sill. Do you know of a replacement part for this? Thank you.

Removed from Pella screen door circa 1975. Bottom rollers. also need top guides if available.

Are you able to tell if you have this part?

nothing on crank, truscom on window