Viewing all customer Discussions for:

Door & Window

I have a 30 inch long broken window balance for double hung, tilt windows. The internal string broke inside the balances. The stamp is 29HD MM BSI as shown in the picture. Can you help me identify the proper replacement balances? Can you also help me identify a compatible pivot shoe replacement ... (cont.)

Need lefts and rights

Need to replace the wheels for the screen to our back slider. Can't seem to find a comparable fit. Thanks.

Older jalousie door hardware

My window is 25yr old and crank has broken. I'm not 100% what brand my windows are but I believe Truth is correct. This crank looks correct from what I can see just I haven't taken of the wood molding to make sure. Wonder your thoughts?

Want to replace Marvin easement window white cranks and crankcase. For right and left sides. What should I order?

I am in need of this style glazing trim. I live in a condo so I need to do every window. If there is availability I would also pass this on to the residents as there are 48 units and no one has had any luck with local suppliers. Any help would be appreciated.Thank YouGary

Quite the assortment of parts needed here. Please see photos and descriptions for quantities and let me know what other info / pics you need!

The serial number is 2121R1 I'm going to need two of them please let me know as soon as you can if you have them in stock

When these windows were installed he said they were better built windows. Not sure if that helps. They were installed in 2005. I have 5 of these windows and all of the balances are broken. Let me know what else you need I know this isn't much to go on.

Hello I am in need of a replacement counter balance as show in the attached pictures. The metal portion measure 21 inches, the table on each end measure 15/16 inch, the curves end that goes at the top is 1 and 1/16 inch from the back of the tab to the front of the curve. Hope that helps and thank yo ... (cont.)

I need a replacement balance, and can't figure out which one to order. The metal is 33" long, stamped 32C and BSI (or B5I, 8S1, or something of that mix). I would like the full setup with plastic ends.

We have to replace a number of tilt latches and require two different styles. Pictued is one style we need pictue 2855shows latch top of latch. picture 28854 shows bottom of latch with a patent number and a N probably manufacturer code? This latch was easily removed by using a flat blade screwdrive ... (cont.)

We have to replace a number of tilt latches and require two different styles. Pictued is one style we need pictue 28861 shows latch in place, picture 28860 show latch that i removed (had to bust out latch) it was already broken, picture 28856 shows bottom of busted out latch with the number 8590. I ... (cont.)

The only markings are 34 2 FW CMC 4.

Hi- Can you let me know if these Phillips vinyl window rollers are available? I have done extensive searching. I can usually source on my own if they around...having trouble with this one. I need 24 roller assemblies. Thank you for your time -Ben

this is for a storm door and I cant seem to find a replacement setpart is about 1/8 in thick about 3 3/4 long 1/2 in high

This is the bottom roller on a top hung screen door

I have a CWS 8900 series sliding glass door. The inside lock thumb switch is loose. Do you sell a replacement handle for it? Thanks!Distance between screws is around 3 7/8. Center of thumb switch to top of handle base is 3 1/2. Thanks!

Balance, Spring, and tilt latch on top of window