Viewing all customer Discussions for:

Door & Window

Couldn't find name, numbers or markings

I have a home built in 2002 in Tampa Florida. I have a set of exterior metal french doors. Each door has 2 sets of hinges, not 3. The hinges slide INTO the frame and the door. Whatever was holding the hinge together has failed. One hinge sets on top of the other and it seems that there is a bushing ... (cont.)

Please help to describe the accessory I need to buy, thank you so much!

Hi do you have a 3/8" dia roller 1/8" wide with 1/16" axle? I think they were brass but don't know if steel is better?

Hello, I have a total of 20 Milgard Tuscany Series white vinyl single hung windows of various sizes all manufactured in October, 2007. All the window balances are stamped BSI and are all the same style which the pictures I have attached all represent. The only difference in the balances are the len ... (cont.)

Hello, I have an Emco storm door with a single broken hinge that I would like to replace. Emco Door Serial Number: 6021956 The top hinge has become fatigued and cracked, so there is little metal left to screw into the door itself. I am hoping to replace one hinge, instead of the entire hinge assem ... (cont.)

Hello, I have a boat built in 2008 that is starting to have various issues such as these window latches that are failing. Specifically, the backing plate is corroding, causing the plate itself to break or the screw receptacles to break off from the plate. What's pictured on the right is the broke ... (cont.)

Hi looking for this tie bar 5 pin 48" window

Hello.I recently ordered and received the window channel balancers from you but just found out these parts are broken and need to identify and order.Can you look at the pics and help me identify and order to replace?It is Top sash guide.Thanks

I have a 28" long channel balance with the T-lock pivot shoe 15-216 attached to the end. This balance is the closest match I can find but it does not have the curved clip on the end to attach to the pivot shoe. Is this a custom balance?

Door mortise opening length 3 11/16" Door thickness1" Mortise bolt holes: 3 7/8" Mortise depth: 1 3/8" Mortise length: 4 7/8" Mortise thickness: 3/4" I need the mortise, keeper, and lever handle (goes from handle to mortise). Do you sell the handles also? Do you think I might need them? Let me k ... (cont.)

I am looking for replacements for these it is a 35 inch long 3430 non tilt the plastic pieces have crumbled apart. The width seems to measure 5/8 that's what it looks like to me also I don't know which to pick between the different models. Thanks

Attached is a door lock for a customer. The lock mounting holes are 9 15/16". The 82-402 product looks nearly the same but is almost an inch too short.

one of these corners is 1-1/2 inches north to south and 1 5/8 inches east to west. With a width of 1/4 inch. The other corner is 1-3/8 by 1-3/8 inch With a width of 3/16 inch. A Swisco rep suggested that I purchase 95?016 for replacements However they are too thin and don't catch inside the slides. ... (cont.)

I need a pair of channel balance for my 16lbs bathroom window. The meter length of the channel is 15.25 inches long.

I bought the 40-119 Swisco mortise security mortise lock. But I need the latch to face the other, because this won't work on my door. How to ?

Replacement pivot shoe and 2 1/16" true sweep lock I have need for 5 of the pivot shoes and 1 lock

We have an Atrium double hung window. There are two identical parts on the inside left and right that keep the window in its track. I don't know what this part is called and if like to provide a picture, but I don't see any way to attach one. We need a left snd right one. It's a tan plastic part abo ... (cont.)

It is 2.25" tall by 0.75" wide, attached by a screw. Any help would be appreciated

Need replacement part