Viewing all customer Discussions for:

Door & Window

Measurement from the bottom of the shoe to the middle of the first hole is 1" 3/16

the window balance broke on my window. How do I get the right balence. What does the 8 mean and what does the 6 mean. Should I replace the other side balence now that it has extra tension on it?

Believe this is from an Atrium window about 10 years old. Spring has a marking that is 7.5# 35". There are some other numbers that are difficult to make out. The window weighs about 15#. The holders appear to be in working order but both springs are broken and bent. Springs are 1/2" wide. ... (cont.)

Inside pic is present old handset.

This thing just sprung one day and I can't seem to find the button part found the spring but not the push in button.... I don't know where it flew off to...They are from around 1988 give or take a year. They are the double glass where you can remove the one pane to wash or add or remove mutton bars ... (cont.)

We need both the cranks and the mechanics that will allow us to open and close two windows. The attached picture is from another window in our home.

2nd arm is 4 7/16s

I did not disassemble as I'm worried that I may not be able to correctly put it back together. The crank works somewhat but the gears feel as though they are slipping or stripped. Are you able to identify a full replacement set from these photos? I cannot find any markings of what brand the window ... (cont.)

The left coil spring has 8 FE stamped on it, and the window balance has 8L on it. So I would need both coil springs and window balance for both sides.

? Unsure what you are asking for...

Need replacement crank operator and handles for side crank awning window

Need the crank out hardware that matches these photos.

Looking for a window balance with a hook on top

I need to get this exact window operator for another window, having a hard time finding what I need.

Have this window needing replacement and need to find a replacement

Problems finding the right relacement crank to attach here. One purchased has the little circle at the end but it's not cooperating. My original had to be almost drilled off. Any suggestions?

Arm is marked - op05-2170 another part marked op051002

Need to replace lock assempbly, measurement for screws on inside plate is 6 3/4 inches. Door is over 20 years old and could nto find any identifying marks

I like to replace this patio sliding door lock as lock is loose and not working properly. Can't find this type anywhere in Homedepot, Menards.

I need this lock replaced