Viewing all customer Discussions for:

Door & Window

1/2 inch wide

Could use some help identifying these for my single hung, internal tilt old MW windows. They simply slide in and out of the window frame, no screws.

I have a broken window lock. The cover says clear choice.

Looking to identify which part to order for a replacment. Thanks

Can you help me get the right parts?

The sliding door is original to the house. The house was built in 1965. The brand of the patio door is Arcadia. The rollers are plastic over steel. I used a caliper to measure the roller, and it is 1.25" overall outside diameter. The roller assembly measures 11/16" wide or thick at the top/bottom ... (cont.)

I only need the cover for this pivot shoe. One of them snapped in half where the screw goes in. Thanks

Hi I need a right and left coil spring window balancers. Both are marked 8. Can you figure out part numbers for me to purchase? Thanks

Looking for a cole sewell replacent handle for a door with the registration number as: 04229696043 23. Specifically the balcony part or the inside of the door. Inside handle holes 1 3/4", center hole 7/8". Inside overall length 3 1/2" Outside oval style trim 5 1/2" screw hole measurements. Handle ou ... (cont.)

Need help please on this product

Need 6' piece

Need part id for this. Has pat# 5.353.548. Approx 4" tall 1" wide. Tension seems to work ok, but upper housing broken. Also I don't see cut out to remove. Is housing simple to replace with that coil spring tension. A video reference would be appreciated. This window is traco series tr4200 dh ... (cont.)

This picture is of a smaller coil balance than I actually need. What is need is 2 of #13 and 2 of #14

Hi!! I'd love help identifying the top and bottom guides for this balance. Thanks!

No visible manufacturer on the existing latch

I am looking for the internal mechanism for this particular patio door handle. That handle is fine and the strike plate, but the locking mechanism inside the handle is broken so I am looking to replace the handle along with the internal mechanisms. Thanks! Jessi

Can you help me find this Operator Watauga Building Supply

The spiral balance on my window is red tip 5/8 diameter and the barrel is 28.5 inches long. The sash weighs 22 lbs. not sure weather to go to 29 inches or 28 inches? No markings on window Thanks ,Dave

Would like to find a replacement part for our patio door. The number printed on the side of the existing lock is 32435. I've seen one of your similar locks (same dimensions) but the top and bottom of our lock is slanted compared to yours which is not.

Please identify this Truth part. I want to replace. both L&R. It does not match 100% any of the Truth parts you show. The actual mfr. of the window is no longer in business.