Viewing all customer Discussions for:

Door & Window

Hi Swisco, I am a homeowner trying to replace both channel balances on a non-tilt window. All of my knowledge has come from researching online and removing balances on a working window and its twin that is not working. I was looking at your website and did not see any channel balances with the sa ... (cont.)

White Finger Pulls 2 7/8" x 1" x 5/16" I do not know the brand of the windows. I need 6 of these.

I want to install crank window hardware on my solid wood windows that hinge from the top (36"W x 18"H). They are in a loft office area. Now I open them by hand and hold them open with paint sticks. In the same 1977 house, there are many side hinged windows that use a crank opener. The sliding channe ... (cont.)

Hi, I need to order two new ones for my window balance. Those two need to be holding at least 26.5 pounds of window. Could you share the whole set of these and order? I added the photos.

3 verticals guides to lock window. There are 3 guides top, middle, and bottom.

Have a client with a window operator with one arm stamped 30744. The longest bar is about 7-5/8" long. The second longest bar is stamped and has a length of approximately 5-1/2". Then the shortest bar is 4-1/2" in overall length with the pins at 4-0" apart. When looking at the window from the ou ... (cont.)

Can you please help identify this and provide part numbers if this is one of your products

Hello, just wanted to confirm that for this window I need the 751 channel balancers. Top panel is a 35E and bottom panel is a 37F. Which one do you guys think I need to get? Hopefully the letter tells you how strong they need to be. I wasn't able to delete old pictures from old post so I had to ... (cont.)

I need help identifying my channel balance. It is stamped 29 4 NH BS1 it is 30 inches long on the metal and 31 inches including the plastic end pieces.

I need two channel balancers. They are 27" long, 1/2" wide. Stamp reads "26 4 FT CMC 4." I believe these were originally from Caldwell Mfg. I have lots of pictures, but either my computer or your website will only allow me to upload five.

Some of my windows are missing the balance this is the part I need.

Hi I have a similar crank to above labeled c-9400-1 but the screw holes on mine don't match your suggested part. The adapter seems like a different set too. Can you please suggest the right replacement?

Swisco team, need some help choosing the correct screen corner for full length window screens. I have uploaded the pictures to help. I have included both top and bottom. The top two have a wedge clip (to lock it into place), whereas the bottom is just a standard square corner. it looks like a 95- ... (cont.)

Wind bent bar when very gusty. The total length from pun to pun us 12 inches. The bar is 9 inches. Cannot find them that short. No numbers shown in part!

Looking to identify this top sash guide. It goes to a 2940 BSI CHANNEL BALANCE.

I have a full view storm door rigid retainer strip that holds the glass in place. The manufacturing label is no longer legible. I do have reason to believe that it is from bonded home remodeling inc., but it does not look like they are still in business. Is there a replacement piece similar to the a ... (cont.)

House is 45 years old

Dimensions: 3/4" wide at the widest point 1 3/16" tall body is 2 1/4" long without the "T" shaped tail body is a total of 3" with the "T" shaped tail

Guides won't hold the windows. Windows are approximately 5'x2'8". cannot find any identifying marks on the guides or windows. Is it possible to measure them accurately enough to find,fabricate new ones?

Hi , I have a patio door handle from Allen Steven corporation which is now defunct, I want to replace these handles with a set that comes with a keyed lock. Can you suggest parts I need to buy from your store