Viewing all customer Discussions for:

Door & Window

Hi, this is my childhood home I'm trying to fix up. Almost all the cranks are missing & the windows won't open. Want to clean & replace.

hi, we have these old pella windows with a lot of broken cranks. however I found out one of them was replaced with a much better and simpler design. i took that off and am sending you the pics of the one I want. its a simple crank that moves a straight arm, and at the end of the arm is a little plas ... (cont.)

Widow bead glazing

the first picture is from the same window not broken. the second is of the part i believe i need. Thanks in advance, Andrew

My windows won't stay open on these Norco windows. What information do you need to identify the parts I need? Thank you- Matt

Non tilt window balance marked 26 3 BT Caldwell. The metal section is 27 inches and both top and bottom plastic ends have wings. What is the replacement part number? Thank you.

Hi, the latch on our door broke off. We need the part and instructions how to replace it on our door as we don't see any screws to undo. Thanks

The spiral balance the came out of the window has a red end and the tube measures 29" long. I cannot determine the diameter of the tube because it's not perfect circle (see photo). Measureing the cross section is either 15/32" or 18/32" OD. I see on-line the Series 900 spiral balance for tilt-in w ... (cont.)

I am trying to locate this spring assembly for my double hung window. It is 26" long and has a double spring (Smaller spring is inside the larger spring). The stamp on the balancer housing is"25DS 36." The balancer attaches with an inch long screw at the top.

30 year old Lincoln awnings, Truth hardware. In the photos, the awning arm is 18", part #40023. My question is regarding the black plastic track guides; 1) Are they available?, 2) Are they an independently replaceable part, or does the repair require replacing the awning arm (hinge) complete? ... (cont.)

I see two parts marked OPO5-1506 and OPO5-1003. You can see it in the photos.

Pivot bars corroded & broke off in shoe Need four pivot bars and two pivot soes

I oiled like to order two or these hinges.

Hello, The balance has a part ID that reads 42-BSI-72-TT, can you please help ID a replacement of each side of the window? Thanks

Looking for replacement retainers for modular storm windows

Need to replace the upper hinge shown in photos. Hinge adjustment screw is bent and shower cannot be adjusted to close correctly as a result. Shower was purchased in 2020 in St. Paul, Minnesota, USA. Probably at Home Depot or possibly Menards.

Either LOB 1 or LQB 1

Hi, checking to see if any of your storm window latches will fit. These are Philips Window latches

There are no visible screws to remove the latch

The lockset in my sliding patio door is not working. Would like to purchase the lockset, Orthe whole set if necessary .