Viewing all customer Discussions for:

Door & Window

Hi, I would like to purchase quantity (20) of the Mastic Sash locks shown in my photos. Please advise of availability and pricing. Regards, Tom

Hi I'm looking for a nylon patio door roller that's 1 1/4" with a 3/16" center groove

Hi; Just need to identify the part number on a sliding door rollers. I believe the door is made by Anderson company. thank you

please I'm loking for the parts on the end of the balancer as shown in picture are broken probably 6 of them. Thanks

I am looking for this complete constant force balancer replacement. It is only stamped with an 8. I would also need the plastic bracket to hold the balancer in place. Thanks!

Need new hardware and weather gasket around casement window 13 inches in length for hinge base

Need replacement parts for casement windows for both left and right side. I have included pictures of the left side casement so would need part number for right side as well. The mechanism arm is 7.5" from the bend to the roller. Also, looking at Outside Pic2.jpg shows the mechanism mounted with ... (cont.)

That's all the numbers I can found on it.

Please let me know what parts will work for the pictures attached. The dimensions for picture 3 are 1/2 " thick, 1 1/4" wide3 and 1 1/2" tall

Good morning, The rollers on our door need to be replaced, can you please identify these? Thank you so much.

I believe its a J26 based on first image also see a number 11600-3 is this part 1626029

Looking for this bracket. It holds the large glass windows around the sliding glass door. Probably from the 1970s.

I need help identifying the part for my patio screen door.

What is the part number to replace the pivot shoe in the pictures above?

I need to see if I can find replacements for these old M&W windows. I think its a 24" rod. It measures about 23 3/8"

Hello I have pella windows and the brace sash clip broke. I would like to see if you had anything that would work Regards,

Hello, I work at a hotel in maine, all of the sliding glass doors and windows are all different per room. The sliding screen door has these rollers and they aren't rolling anymore. Need to find a replacement please and thank you.

Total 10

plastic slider part needed for 20 year old Bonneville vinyl window. It is the part that goes in the channel at the bottom of the window that attaches to the window opening and closing crank in the window frame. There are two plastic sliders on each window. I only need one.

Sorry, but there is no part number on the wheel assembly or the aluminum door itself. They could be original doors from when the house was built in, but really have no idea. Wheel: steel, 1-1/4 inch Height: 1-9/16 inch...maybe 1-5/8 Length: 1 inch Width: 3/4 inch