Viewing all customer Discussions for:

Door & Window

Cannot find name on Window. Only name is on the window hardware and it is A.W. Anderberg. Hoping you can help me out. Thanks.Frank

White housing with foldable gray crank handle, used to open and close casement windows. Marked “MADE IN U.S.A.” with code 04.12.05 001:19. Linkage Arms – steel arms attached to operator. Stamped with numbers: 41010B 31884 41016 Mounting Plate – Multiple screw holes for s ... (cont.)

Hi, the latch from my basement window cracked and I need to replace the piece. Please see pictures and help me if you can. Thank you!

Can you help me identify this tilt pin.

Looking for a replacement for these balances. Also need replacements for the black clip attachment that goes on the top as shown in one of the photos.

hello - many of the small tension clips that hold my screens in place have broken. I have searched for equivalents everywhere but can't find anything. do you carry anything like this? I put the quarter there to give you a sense of the size. Thanks so much-Sally

Need help finding the right one for my windows. 26" long / measurement without the plastic parts and has 2540 on it. 2 1/2 inch wide

This is 24 inches and the number onthe side is 2340

I need replacement "coils" slides and bottom pivot things.... basically everything for Boris sides except the top releases and latches

I am replacing broken pivot shoes. They measure 2"x 1 1/4" and has depth of 1/2". I am replacing broken spiral balances as well. They are green tip, 3/8" wide by 39" in length. That part is easy. The pivot shoe is not. They have blue cam with black brake. I do not know the manufacturer of the window ... (cont.)

Hello, I have a house that I bought was built in 1964. I have Anderson double hung windows and some of the cords on the balances have broken. I have attached a screenshot of the numbers I see stamped on this balance. I don't know what replacement I need for these. Thank you very much. ... (cont.)

2" overall length. Slides in. Couldn't find any markings identifying manufacturer.

Weather Shield window. Vintage about 2004. Tilt in style. Ribbed. Numbers as n the photo. 08 002 27 HD

I am looking for at least 4 items.

Vinyl window. Think its alliance brand. Piece broke off when washing window

I don't believe these are top mounted screws. I didn't see any. I believe these are clip mounted balances since the jambs do come out.

Our window no longer closes or stays open after the cleaners came last week :(. From my research it looks like the top plastic pieces are broken causing the spring to no longer engage as designed, and these parts are no longer being produced. Any advice on replacement hardware?

This is a tilt window. The actual metal channel is 25" long and 1/2" x 1/2" wideth & depth. The lower end of the channel connects to the tilt lock and the top end has a string coming out that connects to a screw in the side of the window, up high. I do Handyman tasks in a fairly large communit ... (cont.)

My windows are about 30-40 years oldA few of my windows won't stay up.

I amlooking to replace the pieces that attach to bottom and window and actual window frame...you can see the rusted parts, we can't close the window completely because it won't slide properly on the far left corner. I can't get the part out because it is soo rusted...the crank works fine though it's ... (cont.)