Viewing all customer Discussions for:

Door & Window

I need a replacement for this type of window channel balancer in the submitted pictures. The markings stamped on my part are: 86 20-3 FB5 CMC 1208. The length is 21". Please help.

I have a really old French door that has a screen and the handle broke and need to replace it. Do you have something that would work? The handle says Pella on it.

Hoping to find a replacement for broken pivot shoe ...there is a '3' or backwards E marking window tag : series DH7 Barrington...see attached I can't get it out of the channel to measure it

It contains 25 9BSI PF text written on it. Ours is a double hung window and window weights 34 pounds

Searching for a replacement for 11600-17 numbers on the side latch 531 J 38901 and are there left and right versions? thx

Hi there I would like to know if you have the part availableNo. D-198,202 U.S RD. 1963 . CAN . Brown color Thanks

Hello Live in L.A. A local storm/security door maker (HIMCO) seemed to use what looked like custom locksets (HIMCO stamped on faceplate). Functionally, it looks the same as the 40-049 (mortised handle and deadbolt set). But the faceplate length and mounting screw locations differ. I don't see ... (cont.)

Need this part for my guest bedroom window.

I'm not sure of the correct size of this and I'm not sure how to get it out of the window. I took the valance out of each window but it looks like the shoes need to be replaced as well. I'm thinking this is a 26-in valance with a blue tip

Used to secure cable and guide in channel not sure what it is called.... sash cord anchor? thank you

Channel length is 32 5/8 inch. Stamp printed is 32DS BSI VT 48 Not sure manufacture. One of picture shows missing top and length without top part of is 33 1/4 inch.

I am looking for a replacement for a broken internal window latch. I have attached pictures from an identical latch that is not broken to (hopefully) better show what I'm looking for. . As shown in the photos, the internal latch has a triangular "tooth" that is approximately 1/4" long x 3/16" wide ( ... (cont.)

7L printed on the balancer

The clasp part that is plastic will no longer hold the window in place when there is a wind blowing and needs to be replaced.

I have a customer that has these sliding glass doors. Somehow the cylinder is missing. I was looking for either replacement handles, or a complete handle and lock replacement. Please let me know if you have anything. Thanks, Dan

I have a customer that has single sash tilt windows and needs several window balances replaced. I'm familiar with channel balances, but I have not encountered these types of balances (see attached photos). If you can, please identify the balances and offer possible replacement parts if available. ... (cont.)

Replacing window balancers for 2 kitchen windows. Window sash is #10. The balancers were installed when the house was built in 2017. Side is stamped "20 2 FQ CALDWELL". Nylon foot at bottom appears to be 1".

Length and stamp: 26 4. Original Pella part # 2640. Your description is "Extended Travel" (roller at the bottom). 1/2" wide. Pella windows around 2006. I may have purchased these from you before. I need one, may buy two. Thanks for the help, Barrett

I need 5 left-opening and 4 right-opening sets! They could not find any markings, numbers, or names...

Number on balancer 26 5 Length of metal bar 26 7/8 Need 2 balancers