Viewing all customer Discussions for:

Door & Window

Hi, I need help finding these patio rollers, we do not know the manufacturer Please see attached pictures Thank you,

Can you help me identify replacement parts?

no markings on window

there are 2 hooks on the latch that engage in the hardware on the frame. the bottom hook does not move down when the lever is pushed. pictures of latch attached. ( locking latch ) Thank you for help.

I have these windows throughout our 1957 MCM home and only about 3 windows open and more importantly, CLOSE when cranked. I am looking for replacement gears, boxes or whatever else I may need to make them ALL work like new again.

Pics show window with arm disconnected & other pic shows working window

I need new window balances for tilt out inverted block and tackle with stamp 32c they attach to the frame with a hook style fixation There are T shoes that appear to be working still, but measure about .5 inch depth x 1" width.

One side is missing, no number found on item. Length - 33 inches

I want to replace all the old glazing bead on my windows to a square look. Anyone have suggestions on which part will work? 3/8in. high and 1/2in. wide. Would this work: https://www.swisco.com/6-Vinyl/pd/Snap-in-Glazing/55-193?variant_id=12856

Would like to replace Anderson sash balancer from a window installed around 1986 or 1987. The stamp I see is E41 9#27 6 86 . Which one would I use as a replacement? Thanks.

Good Afternoon, Are we able to get 38-208 from the Manufacturer in Brushed Antique Brass? Thanks.

Hi, do you have anything that would fit these Jeldwen vinyl windows?

I need to replace this part. Do you know what it is and do you carry it? Thanks

Can you help me get a replacement pair.The long arm is 10 inches Thank you Jim P

I need the part where the window goes in on each sides so the window can slide up and down I need both sides.

I have a number of windows with stubborn or broken pivot post sash carriers, that need replacing. The one i have removed has PAT# 6679000 stamped on it. Its measuring 1" wide, 1/2" deep, and approximately 2-3/8" tall. Do you have something that would be a suitable replacement?

This is what's left of the bottom guide on a Gorell patio screen door. I have not had any success in locating a replacement part. The number stamp on the guide is 47078.Any assistance would be appreciated.

Pivot bar from a double hung window. 3 inches long, 1/4" wide, 3/16" deep. I can't find any numbers or markings, it has one hole that is 1" from the end. Cross section is 'U' shaped.

Do you have replacements for these pulls? There is no ID of any kind.

Our house was hit with hail/tornado damage on March 14th. The vinyl glazing bead on our basement windows took a beating. I cannot find any markings on what kind/brand of windows they are. I've contacted the builder (Fulford Construction), and all I know is that they were installed by Wilke Window he ... (cont.)