Viewing all customer Discussions for:

Door & Window

We need to know if you have 10 in balancers E-50 that looks like photo # 1 Also need to order S377-30 option 2040 & S350-30 option 2950 Think you for help in this matter Vince

There are nothing printed or stamped on the parts anywhere. The were in the bathroom window of my sons house which was built in 1963. I hope you can identify them for me, let me know what they cost, and if you could tell me how to reinstall the sashes it would be wonderful. I can't find anything ... (cont.)

My dad says they could be original 1927 hardware. Windows are 3 panels, horizontal, aluminum frame there are some markings on outer pieces indicating left or right with some numbers. I am not there at the moment to see them Please help, thank you.Douglas

I'm looking for a roughly 30-inch replacement strip of glazing bead for my sliding glass door. I attached photos of the old piece to show dimensions. I've tried a couple similar looking pieces but they will not snap into place. The tag on the inside of the door has the following information: Seri ... (cont.)

2008 Centex home with missing sash balances on one side if a heavy, double, front window. Window sticker included in one of the uploaded photos

Need corners for my screens! Hopefully I covered all the measurements.

Good Afternoon I'm hoping you can help in identify these so I can order replacements.

I broke the inside handle. Also, upon removing the locking mechanism a small spring fell and is broken. Pictures are attached. So Sorry is these is a repeated request

This is similar to many of the snap-in glazing that you list, but I can't find any that match the dimensions. Have anything? Thanks

The balance is 28 inches long not including the plastic ends just the metal part. The only identifiers on the balance are the numbers and letters in the pictures I attached which are 27 5 GV CMC 2. Please let me know if I need to send you anymore information. Thank you.

Hello, I'm looking for replacement window glides for single hung windows. They were installed in 1987. They have a 28p on them and from metal end to end are 29 inches. Thanks!

Hi. I bought tilt latch actuator item 26-234 in August 2018. The dimensions match mine, except that the "teeth" on the underside is not in the same direction.The pictures above show my broken part (yellowish) and the tilt latch actuator (white) that I bought which isn't the right match. What is t ... (cont.)

I'm not sure if this is from an Andersen 200 series double hung or American Craftsman 70/50 series but I need this pin, all help is appreciated.

DNS Industries 1400 series patio door lock for a sliding glass door that's 1.25 thick.

Hello I have two of these windows that are missing the window latch part for these locks. Thanks!

I have patio door that has .185 nylon spline. Its a little loose that prolong touching causes screen to come out of the groove. Thinking of trying the foam spline what size would you recommend.

Looking for glazing bead part #VGBPEREABLK - black - 16' approx

Please find below pictures of the plastic stops I need. I actually need two pieces of those ( first two pictures) and one complete kit ( for one window) or two pieces of Channel Balance. Regarding the shoe the depth is 1" which makes the 15-005 the right one. I will only need one kit or the two Chan ... (cont.)

I am needing a balance for a non tilt wood window for an older home (maybe 90's) for one of our client's homes. They are not wanting to replace the sash?only the balance. Since the window is in one of our client's homes, we can't take the window out until we receive the replacement part. The win ... (cont.)

I do not have pictures of the lift rail but it is white and the demensions are 1/16 x 3/4 x 28 1/8". The attached pictures are for the glazing strip. The piece itself is 24 1/2" long.