Viewing all customer Discussions for:

Door & Window

Hello - trying to identify corner key and spline for storm windows - can you help? sorry for poor photos! Jim

20 4 JP CALDWELL

I have a single-hung, vinyl Marvin Window and I need to replace one of the Channel Balances. The sash size is 45 and 5/8th inches and the height is 34 and 7/8th inches. I have measured the metal portion of the broken Channel Balance and it is 33 inches. The plastic shoe and top that comes with your ... (cont.)

KEYED MORTISE STYLE HANDLE SET, 4-15/16" Product Code: 82-081 can you tell me the correct mortise lock and striker to go with this handle set?

I need to replace the sliding window latch shown, can you provide the item # and availability to purchase? Thank you

I have a Milgard window. The metal portion is 25-11/16" long and 9/16 " wide. Here are photos of the top and bottom. The window weighs 15.8 lbs. Which unit should I order for replacement? Thank you

Can't open sliding patio door due to it tilting and getting stuck. Can this be fixed. Don't know the problem or hardware that might/if resolve this problem

Hi ,I am looking for this balance ,I don't have idea,which one match it ,plz find it ,thank you !

Counterbalance metal strips with #2630 and DSI or DSJ and the letters NC

Part # show (01/3) UNIQUE 27-B-20, but measure show 29, which one should I order? Thanks for the help

3/4" wide by about 1/8 " deep. White

Hi. Can you help with this? Thanks

Hello. I can't find anything that looks like my rollers in the local hardware stores or online. They don't have any markings that I can find. I was hoping you could help me order these. Thank you. Emilio

Need to replace balancers on my Milgard Windows. Length is 25.75" as shown in the photo marking lists "25 4". Is the matching part 2540? Thanks

I have several of these clips that are broken and the perimeter seal or weatherstrip on some of the windows is failing. Thanks, Lance

Roto half inch sash clip Bottom crank out window I just need a couple of these small clips, not the whole assembly

We can?t figure out how to take the glass out. No glazing seals and no screws in the sides. Entire drama seems to be thermo welded around the glass!! Any tips?

window pivot bar DHPB-58

The numbers on the broken balance are c 6 31 273. This is on a double hung window.

Hi there, Trying to replace my Truth dual arm window crank. My number is 40471 (see pic) but cant find that replacement anywhere .. the arm also says 30841L and 31229L(1 is left and one is from right set) (I need both left and right side units).. One question...so when I open window fine..but when ... (cont.)