Viewing all customer Discussions for:

Door & Window

Hello im looking for this rollers atached picture and aproximate measurements This rollers are for a fleetwood patio door,, the doors were install it about 12- 14 years ago 11/16 wide Wheell 1 1/2 Can you help me??

do you have these parts and cost

Trying to repair a few broken vinyl Windows and I would like to replace these

Hello! Pictures attached are of the mechanism used for porch windows. I need replacements for at least two and not sure how to measure so I get the right fit. Any help in how to measure or where to purchase would be greatly appreciated. The company was Permaseal Corp out of New Jersey and they a ... (cont.)

Can you identify this part? I think there is a cover that goes with it.

I need to get 12 of these balances. They appear to be a cross of the 400 and 900 series. Please advise I need these quickly for a client.

I was wondering if this crank can be replaced by a folding crank? I would like to get plantation shutters and the cranks get in the way of operation. Thanks

Hardware on my bi fold doors has failed. Please see 4 attached files. "guide.jpg" This is the stationary guide and is cracked. I need a replacement. "slide.jpg" 'Stanley' and '2819' are stamped on this slide. The slide is OK. I am including this picture for reference. "track.jpg" The tra ... (cont.)

1996 liberty manufactured house came with Phillips windows. The double sided tape isn

I have a series 152 coil balance with a 15-175 shoe. I don't see my support hardware in your catalog. I have attached photos . My supports are approximately 1-1/4" wide, 1-7/16" Tall and 1/2" deep. What do you recommend for replacement?

Is the SASH WEIGHT RANGE the weight of the window? I ask because the channel balances I've replaced all said 32C but the balance shoe keeps breaking (wish they weren't plastic). My window is heavier than the range of the 32C (if that's what the weight range means). Should I be ordering a differen ... (cont.)

Can you help me to find 2 springs for my window and another part next to it?

Hello; I have a single hung tilt aluminum window with a sticker on one that reads; ANSI/AAMA 101-85. I was in a process of cleaning my windows and the plastic window latche broke of do to age. I need replacement parts. Thank you for your help!!!! Warm regards; Bea

It's close to the capitol snap in, I'm measuring ⅝" vs

Inside and outside replacement handles neede

Plastic keeper that lock the tilt feature in the sash. It says

Believe to be 38-138 or 38-139. As both hole centers are same, how would I determine which part is correct and matching others?

I am looking for 4 levers and casings to match the attached photos. Do you carry them or can you identify them? Thanks!

Looks very close to your 9" 39-020 Please let me know if you agree and I will place order. Sure is great that you offer replacements for obsolete manufacture parts at a reasonable price.

Single arm, 5/16 handle stud, part # on silver gear is 30843L, the arm attached to gear # 30841L and last arm with the clip is # 01802 A part # of 30830 is also on main housing. Can I buy this or a direct replacement for is