Viewing all customer Discussions for:

Door & Window

Need to replace channel balances on Alenco window. It has 2730 stamped on it. Would it be easier to lift the window if replaced with 2740? Also, the weather strips in the top window needs replacing. What do I need for that? Part no.?

I wanna find this excat part that i need to fix my window

I am looking for a few parts. 1) 2 screen door pulls Screen door shows the actual part. Screen door photo 2 shows where it goes. Another photo shows the spacing between the existing holes. 2) Replacement handles with locks for sliding glass doors sliding_door_inside1.jpg-sliding_door_inside5 ... (cont.)

Hi we have 2 window crank covers broken, as per picture. I tried to measure and it seems about 5 1/2 x 1 1/2 but maybe a little smaller. I also have a US address if you don't ship to Canada.

My rollers are 3 3/8" high and with the wheel inline with the length it is 4 1/2" long, the width is 1" , the depth is approx 5/16", the wheel is 7/8". As you can see in the pics there are no marks or numbers. I would like to confirm that your part #84-011 will work for my door, even though your p ... (cont.)

can I replace Pella operator 29-175 with 39-096 as they look the same length if you add the last small piece that is to be screwed to the window

The balance spring is marked 32R, BSI and a small PG. The overall length of the spring balance is 34 3/4 (thirty four and three quarters of an inch) or 882mm. It is fitted to a Weathershield Wood tilt sash. The window is 11 years old. The balance has a metal push down cord brake. I also need we ... (cont.)

Do you have the siding glass door lock assembly or just the lock cylinder only for this type of door lock? Just purchased the house and want to have the lock replace. Please let me know what else you need. Thanks

Hello - I have several windows in a condo that are not sliding properly. I have not been able to identify the manufacture of the window and have been struggling to find the replacement part. Please see the attached photos. Hoping you can help. Thank you

Tom, Please see the attached photos for the oversized spiral balance we are trying to replace and let me know your thoughts for replacement. Thanks, Cory

I need to replace this and n ex the parts number thank you!

Metal latch snapped off in locked position....yeah it's cold here! Need to replace ASAP. Probably will need the reachout deadlock assembly also. The latch plate is about 4" long, See photos of plate and the thumb latch. Want to make sure you can I.D. it before ordering. Many Thanks,....Kevin ... (cont.)

how do you go about removing the old balancer out and installing the new one is there a video on youtube that demonstrates this please get back to me with the information thank you. Louis Gillingham

Sash 26" 34 lb (28"x42-3/4")stamp 2590 Sash 23" 30lb (25"H x36-1/2"W)stamp 22.4LG Caldwell 30 lb./sq.in Sash 17" 20lb (18 1/2" H x 50" W) stamp 1590 channel 9/16" wide (trade 1/2") glass thickness 1/2" Please advise as to sash balances to purchase Thank

I need help in identifying a replacement part for the little plastic parts that fit inside the frame and allow the screen and window to move in the frame track

Likit Hayward, CA Door Pat #3.106.753 We are looking for replacement rollers. There are two gray plastic rollers under the heavy glass door, one which broke. Can you please identify the best replacement roller for this type of door? Thank you so much!

Screws holding on the locking handle are 4 inches apart.

Trying to find a mortise to fit my sliding glass door lock. Holes to insert the handle our 4 15/16 inch.

So we have Patriot Windows. I need the anchors that the balance string screws into the window frame. Also need one or two Tilt Latches Left and Right Side

The window is a Norco/Jeld-wen double hung wood window inside and out 2x4 exterior walls with brick veneer. Need the broken part =as shown in attached pic. Measurements of the window sash and glass size below. Jambliner- 73 3/4 inches long (measured from sill to top inside), bottom sash size is 30 ... (cont.)