Viewing all customer Discussions for:

Door & Window

Hi. I need a replacement for this balance. It says 2940 on it. It

Hello, I have the attached door handles that I would like to replace; these are two different types. I cannot find replacement parts. Would you have these parts available? See attached pictures. Let me know if you need additional information. Thanks Gus C

I found no brand name on the lock but on the window the manufacturer is listed as SNE Enterprises. The home was built 2006/07

Hello this channel balance is to a old seasonall nuprime window. I would like to replace both ballasts As you can see it measures 30

I would like to buy 2 of this parts, can you let me know. Thank's.

Have Freedom White Clad Casement windows from MW that are 24+ years old and they have white plastic keepers in the middle on the hinge side to assist closing and sealing. Keepers are L shaped 1.5in long with 5/8in side and 13/16in side with two screw holes Item # maybe 12983 but it's been a while si ... (cont.)

Hello, I have the JW lock set PAT #: 5.820.170. The locking latch has broken and need to replace it. Looked on your sight and didn't see the one I needed. Can you please let me know if its available. Thank you Randy

Looking to replace this window lock.

Is your part # S-160-7 the part That I need to replace a spring with part# 5232208 with #7.5 35 The spring is 1/2"wide

Hi do you have anything similar to this cabinet door bumper - attached is an image.

The patient is a 22 by 50 inch casement window with a Truth 45035-RH window crank. The window cranks open, but the threads holding the cranking screw in place are stripped and the window will not crank back in. the retainer nut turns and allows the cranking screw to walk out of the cast aluminum bod ... (cont.)

Small rope comes from spring in lower side bar and stretches upward to piece I have that

Do you have a video showing the installation of the universal glazing spline? Do I cut it to fit my window or does it adjust itself?

I ordered some 26-139 single hole aligners to replace existing ones that have shredded -discovered during spiral balance and pivot lock shoe replacement. I'm finding the material to be more dense in the new single hole aligners I received, and I'm having difficulty reinstalling the snap in glaz ... (cont.)

I have the roto base #G2OSCP01 #39-248looks it would work I also need the operator to go with the base mine is broken I just cant find it thank you.

my old metal channel . measures 25 3/4.and it is similar to 380 and 385 series. can I use a 25" metal channel or a 26"? please advise so I can order it. thanks in advance.

Awning windows locks or other name R and L. On R some numbers PAT 2997754 Please help to find replacement for missing parts. Thank in advance. Alex

Do you sell just the zinc cam for the shoes with blue break?

As you can see I need to replace the snap in glazing sections on the is window. The diagonal flat surface is 5/8 inch wide. We are having ant problems and it appears the ants may have nested inside the glazing. The windows are metal, and have a Seasonshield name on the hardware. Do you have a re ... (cont.)

Windows have dual coil balance springs on each side of window. Upper coil spring is labeled 440 and lower coil spring is labeled 540 Width of spring is 1/2 inch Weight of window is 23.4 pounds Springs are 25 years old. All other parts work properly, tilt window shoe locks etc. Springs ... (cont.)