Viewing all customer Discussions for:

Door & Window

Hello, I am looking for a angle bracket that holds the corner of the windows together and also includes the pivot bar part of the tilt mechanism. The pivot shoe was not lubricated and the pivot bar broke on one side. I had to remove the bottom part of the vinyl window to remove the brackets Each ... (cont.)

Please help let me know which window trim bead would be best to order. I enclosed a cross-section photo of the original window bead and a side view. The original window (metal) is bronze is from 1990. Thank you.

Number found on window latch shown in photo:20622

20810A is found on the linkage arm in above photo. The window needing this replaced is the left side window when looking at it from inside the house.

The broken piece (pictures are of the broken piece attached) says Spect US. It is part of a Wellington Tilt Window installed in 1998 (Wellington is in MN).The half circle area is where the peg broke. A screw goes in that area to attach it to the window. The other part of the peg is still attached to ... (cont.)

Non-tilt window channel balance 1/2" channel width 29" length 28 3 HL CALDWELL Attached 5 pictures From the above information, which part number is needed? Thank you for your professional tips!

I need to replace the block and tackle devices on two windows. The first device has a designation 22 4 IQ Caldwell the second designation is 24 4 EQ Caldwell.I wish to replace both devices for each of two windows.I will attach photos of the plastic ends.

Hello I have a several double hind windows. One of them is missing a part of the sash lock. Please see pictures. I am not sure which brand of windows these are but may probably be Marvin. The thing peculiar to this window is that the part in which the lever engages is at an angle the the missing ... (cont.)

This is from a fifty it sixty year old window. It appears as though the internal mechanism is no longer worker. Please suggest the appropriate replacement parts. Thanks, Grace

hi there! I'm looking for what looks like the cips that are attached to a window that hang on top of the tackle/spring window balance. the piece/gap measures 5/8 inches wide.

This is about 1 1/4" wide and 9/16" wide. There are no markings on the windows or this piece. As far as I can tell, the part that the window hooks in broke or disintegrated. Both the left and right sides need to be replaced.

This is from my window. It's width is 1/2" and it's length is 29". It has a stamp of "K 29-1" on it. I am looking for replacement.

Not sure which type this is. Please help! It looks like a 3' Keller snap in but wanted to make sure before I buy.

Hello, I just bought a house and I am trying to find the manufacturer of these windows so that I can replace the broken handles on this window. The first pictures are the two broken handles, the second pictures are of a companion window with parts still intact. On the inside of yet another compani ... (cont.)

Hi, I'am french and i need 12 unit of this slider for glass windows in aluminum. Have-you it ? And if it's "yes", how i can order you ?

I am looking for the part that attaches to the spring and into which the sash pin inserts. Please see the photos attached. They are photos of the broken part. The part is approximately 2 inches long by about 1/4 in on each side.

Need parts for new construction vinyl window. Purchase around 2001.

I am not quite sure what this part is even called. It is about 5/8 inch big and it is hard plastic. It goes in the end of the balance of a storm window. We are having trouble finding this piece anywhere. If you could help us we would greatly appreciate it.

Do you have a replacement for this shoe?

Looking to purchase replacement Traco Latches/Locks. Please see attached photos.