Viewing all customer Discussions for:

Door & Window

I need a 96" piece. I found the same shape on Gordon Glass, but shorter and just 1/8" narrower. She wouldn't say who the manufacturer is.

Hi, I am looking to replace window balances on 5 windows in our home. All have broken strings. The windows are marked Viking/Temp 8EA1 VI-1 CLA 88A Feb 15, 1996. They are vinyl windows. The balances have 2620EH stamped on them. They measure 1/2 wide and are 28 1/4" long including the plastic ... (cont.)

I am looking for a 25 5 ES CALDWELL channel balance. Here are two pictures of the two end pieces. The metal channel is 1/16" short of 26".

I need to replace the image I attached-I measured this spiral balance to be 3/8 17 inch for a doulbe hung tilt window. Is this the only part I need to order?. I don't know what the orange and blue caps are for or if I have to order the other pieces shown during checkout. Please let me know. Thanks. ... (cont.)

The inside of the casement operator to my skylight window is stripped so the handle does not catch when you turn it and the window will not open/close as a result. I can't find any markings or identification for the parts or window itself. I'm looking to find replacement parts but not sure how to fi ... (cont.)

Spiral balance tip color not there. Window weight 16.7 ibs Length - 29 inches Diameter - 3/8th

Alcoa windows were used when my house was built in 1977. All the weather stripping has deteriorated which causes some windows to leak when it rains. Please advise if you have replacement weather stripping for these windows. It is not possible to provide a picture because all the weather stripping ... (cont.)

I recently purchased a replacement Acorn door handle, 82-055. The size and dimension are fine, but I cannot remove the old handle. I can unscrew and remove the "inside" part of the handle, but I cannot get the "outside" part of the handle off. I have tried a phillips screw drive and I have tried s ... (cont.)

The attached part is a lower piece of window molding that becomes cracked when the window latch is left closed cracking the molding when closing the window. The molding is around the entire window but the lower piece is the only one that breaks. Need a good supply of it. Large 236 apartment comp ... (cont.)

The windows were made by Kinco in a home built in 1986 in Florida. I know I need several 2810 window balancers, but I'm not sure which one. Also, the part number for the sash guide / cap. Please see attached photos...

Today I bought item number 26-336 The Simonton Pivot Bar, is this the correct piece? My issue is a falling window it won't stay off when you lift it it falls down

In need of replacing part from Delmar Engineering Long Beach, California. The track is 93 inches long in total. Need track cover and rollers to fit.

No names or markings or labels window make unknown

We have three different windows that we want to order replacement balances for. - The first three pictures are of the downstairs window balance. The balance is 1/2 inch wide and 34 inches long with the numbers 3330 DL. I will send two other emails.

I need help with replacing a Kolbe & Kolbe window crank assembly. The gears are not engaging and the interior components keep coming unscrewed when trying to open or close the window.I just need the internal working mechanism as the arm and handle are fine. Thank you.

Not sure exactly what is needed to make this right.

How do I measure the size of my casement window operator? I need replace two of them. The model number is 30842R for a Truth Hardware Entryguard operator. Thanks SteveEntryGard TRUTH 20810

I need to replace the coil balances on 2 windows. The window weighs 15 to 16 pounds. I think I have identified the correct parts to order (8 lb Series 140 Quick-Tilt, Single) X 4 pcs. The attached photo only shows part of the current coil because the bottom part is no longer connected. Now for my ... (cont.)

Hello, can you identify this Softlite Elements double hung pivot bar?

Serial number on extsion arm 6996p Truth brand stamp on extension arm Weather Shield brand stamp on crank handle